Custom one piece driveshafts with slip yoke - Ford, Transmission 28/27 Spline, 1.600" Barrel

Custom One Piece Driveshaft Identifier.

Click the buttons below to find your custom driveshaft. This is page 1 and you will pick your transmission or transfers case make, and then model. If you do not know your model you can select your spline count instead.

Custom One Piece Driveshafts
Built in the USA
Balanced & Ready to Bolt In

Exactly what you want, race upgrade available
Free Ground Shipping in Continental US
100% custom built to order Driveshafts

Contact us if you have any questions:
CHAT PHONE (574)287-9650

Output type: Slip Yoke | Drive Type: 2WD | Ford/Lincoln/Mercury | Transmission category (G)

U-Joint Size:

Start Over

Output Type: Slip Yoke X

Drive Type: 2WD / RWD X

Transmission Make: Ford / Lincoln / Mercury X

Transmission Model: 28 Spline / 1.600" Barrel X

1330

1350

U-Joint Quick Reference Guide:

All Action Machine Inc. driveshafts are built with Premium Dana/Spicer, Non-Greasable U-joints

Outside Snap Ring U-joint

Series	Width	Cap Diameter	Max HP
1330	3 - ⁵₈ (3.625)	1 - ¹₁₆ (1.063)	700
1350	3 - ⁵₈(3.625)	1 - ³₁₆ (1.188)	1000
Full Outside Snap Ring Measuring Guide

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Ford, Lincoln, Mercury | Transmission category (G) | U-Joint 1330

What material you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 2WD / RWD X

Transmission Make: Ford / Lincoln / Mercury X

Transmission Model: 28 Spline / 1.600" Barrel X

U-joint Size: 1330 X

Steel

Aluminum

Driveshaft Material Guide: 1330 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish

Output type: Slip Yoke | Drive Type: 2WD | Transmission Make: Ford, Lincoln, Mercury | Transmission category (G) | U-Joint 1350

What material you like your driveshaft made from?

Start Over

Output Type: Slip Yoke X

Drive Type: 2WD / RWD X

Transmission Make: Ford / Lincoln / Mercury X

Transmission Model: 28 Spline / 1.600" Barrel X

U-joint Size: 1350 X

Steel

Aluminum

Driveshaft Material Guide: 1350 Series

Steel

Tube Diameter	Max Custom Length:
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 68 Inches - Center to Center of U-Joint
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price.

Aluminum

Tube Diameter	Max Custom Length
3.0 Inch	Up to 56 inches - Center to Center of U-Joint
3.5 Inch	Up to 61 Inches - Center to Center of U-Joint
4.0 Inch	Up to 72.5 inches - Center to Center of U-Joint
5.0 Inch	Up to 85.75 inches - Center to Center of U-Joint
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish