Custom one piece driveshafts with slip yoke - Ford/Lincoln/Mercury, 34/33 Spline
Custom One Piece Driveshaft Identifier.Click the buttons below to find your custom driveshaft. This is page 1 and you will pick your transfers case make, and then model. If you do not know your model you can select your spline count instead.
Contact us if you have any questions: |
U-Joint Size:
U-Joint Quick Reference Guide
| Outside Snap Ring U-joint | |||
 
|
|||
| Series | Width | Cap Diameter | Max HP |
| 1415 | 4 - (4.188) | 1 - (1.188) | 1200 |
| 1485 | 4 - (4.188) | 1 - (1.375) | 1500 |
| 1555 | 4.964 | 1 - (1.375) | +1500 |
| Full Outside Snap Ring Measuring Guide | |||
Material:
Driveshaft Material Guide: 1415 Series
| Steel | |
|
|
|
| Tube Diameter | Max Custom Length: |
| 3.0 Inch | Up to 56 inches - Center to Center of U-Joint |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 68 Inches - Center to Center of U-Joint |
|
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price. |
|
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 4.0 Inch | Up to 72.5 inches - Center to Center of U-Joint |
| 5.0 Inch | Up to 85.75 inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish |
|
Material:
Driveshaft Material Guide: 1485 Series
| Steel | |
|
|
|
| Tube Diameter | Max Custom Length: |
| 3.5 Inch | Up to 61 Inches - Center to Center of U-Joint |
| 4.0 Inch | Up to 68 Inches - Center to Center of U-Joint |
|
Tube Material: 0.083 Inch Wall DOM Seamless Steel is our most popular material choice due to its versatility, high strength and economical price. |
|
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 5.0 Inch | Up to 85.75 inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish |
|
Material:
Driveshaft Material Guide: 1555 Series
| Aluminum | |
|
|
|
| Tube Diameter | Max Custom Length |
| 5.0 Inch | Up to 85.75 inches - Center to Center of U-Joint |
|
Tube Material: 0.125 Inch Wall 6061-T6 Seamless Aluminum is lightweight, can handle higher torque loads and can give you a nice polish finish |
|
If you do not see your vehicle option, contact us today for cataloging: CHAT Phone (574) 287-9650
