Spicer 5-8111X U-Joint

{"id":3762749898804,"title":"Neapco 4-5173 U-Joint","handle":"neapco_4-5173","description":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Cross\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD \/ WING-DWT\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 5C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.688 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e4.529 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Instock Part:\u003c\/strong\u003e\u003cbr\u003eAMI \u003ca title=\"AMI 5-5173XMS U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-5173xms?variant=40808623046807\"\u003e5-5173XMS\u003c\/a\u003e U-Joint\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-22T14:15:27-04:00","created_at":"2019-07-22T14:15:27-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["45173","BetweenBoltsBullet_1.688\"","Brand_Neapco","Distance Between Bolts_1.688\"","Grease_Greasable","LockUpBullet_4.529\"","Part_U-Joint","Pilot Diameter_4.529\"","Series_MECHANICS 5C","SeriesBullet_5C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD \/ DWT"],"price":14919,"price_min":14919,"price_max":14919,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29045010530356,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"4-5173","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 4-5173 U-Joint","public_title":null,"options":["Default Title"],"price":14919,"weight":4536,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"083869451732","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/4-5173.jpg?v=1563819492"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/4-5173.jpg?v=1563819492","options":["Title"],"media":[{"alt":null,"id":3057353359495,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/4-5173.jpg?v=1563819492"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/4-5173.jpg?v=1563819492","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Cross\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD \/ WING-DWT\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 5C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.688 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e4.529 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Instock Part:\u003c\/strong\u003e\u003cbr\u003eAMI \u003ca title=\"AMI 5-5173XMS U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-5173xms?variant=40808623046807\"\u003e5-5173XMS\u003c\/a\u003e U-Joint\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":8702410885,"title":"Spicer 5C-3X U-Joint","handle":"5c-3x","description":"\u003ch1\u003eUniversal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cspan\u003e1480\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003e5C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eWing (HWD)\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCap Measurement:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003cbr\u003e\u003cspan\u003e1.375 Inch (\u003cmeta charset=\"utf-8\"\u003e34.9 mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDistance Between Bolts:\u003cbr\u003e1.688 Inch (42.9 mm) \u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cstrong\u003eLock Up \/ Length:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003eSnap Ring to Snap Ring:\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e4.188\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInch (\u003cspan data-mce-fragment=\"1\"\u003e106.3 mm)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\u003cspan mce-data-marked=\"1\"\u003ePilot Diameter:\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e 4.531 Inch (115.1 mm)\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eGreaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046 \u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"Outside Snap Ring, Wing U-joint\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" alt=\"Measuring a yoke\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing U-joint \/ Outside snap ring\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (G)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nDistance over Caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (D)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCap Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 5-347X U-Joint (Obsolete)\u003cbr\u003e","published_at":"2017-08-02T14:33:38-04:00","created_at":"2017-08-02T14:33:38-04:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["5C3X","BetweenBoltsBullet_1.375\" X 1.688\"","Brand_Spicer","Conversion","Grease_Greasable","LockUpBullet_4.188\" X 4.531\"","Part_U-Joint","Pilot Diameter_4.531\"","Series_1480","Series_1480 X 5C","Series_MECHANICS 5C","SeriesBullet_1480 X 5C","Snap Ring to Snap Ring_4.188\"","Snap Ring to Snap Ring_4.531\"","U-Joint Type_Wing","U-Joint Type_Wing \/ Outside Snap Ring","Wing Bearing Type_HWD \/ OSR"],"price":16981,"price_min":16981,"price_max":16981,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":38130353669,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5C-3X","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Spicer 5C-3X U-Joint","public_title":null,"options":["Default Title"],"price":16981,"weight":1542,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"023913247874","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X_B.jpg?v=1502115520","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X.jpg?v=1502115551"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X_B.jpg?v=1502115520","options":["Title"],"media":[{"alt":null,"id":2392112955527,"position":1,"preview_image":{"aspect_ratio":0.586,"height":2938,"width":1721,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X_B.jpg?v=1502115520"},"aspect_ratio":0.586,"height":2938,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X_B.jpg?v=1502115520","width":1721},{"alt":null,"id":2392113053831,"position":2,"preview_image":{"aspect_ratio":0.857,"height":3370,"width":2887,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X.jpg?v=1502115551"},"aspect_ratio":0.857,"height":3370,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5C-3X.jpg?v=1502115551","width":2887}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eUniversal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cspan\u003e1480\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cspan data-mce-fragment=\"1\" mce-data-marked=\"1\"\u003e5C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eWing (HWD)\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCap Measurement:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003cbr\u003e\u003cspan\u003e1.375 Inch (\u003cmeta charset=\"utf-8\"\u003e34.9 mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDistance Between Bolts:\u003cbr\u003e1.688 Inch (42.9 mm) \u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cstrong\u003eLock Up \/ Length:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003eSnap Ring to Snap Ring:\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e4.188\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eInch (\u003cspan data-mce-fragment=\"1\"\u003e106.3 mm)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\u003cspan mce-data-marked=\"1\"\u003ePilot Diameter:\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e 4.531 Inch (115.1 mm)\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eGreaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046 \u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"Outside Snap Ring, Wing U-joint\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" alt=\"Measuring a yoke\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing U-joint \/ Outside snap ring\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (G)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nDistance over Caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (D)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCap Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 5-347X U-Joint (Obsolete)\u003cbr\u003e"}

{"id":8019225541,"title":"Spicer 5-4111X U-Joint","handle":"5-4111x","description":"\u003ch1\u003eDriveshaft 4C Universal Joint\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003eSpicer 4C Series Greasable Wing Type U-joint often used in forklifts and similar applications. All 4 caps are drilled (HWD High Wing Drilled). Includes 8 bolts and washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Mfg:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItalcardano\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e4C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD (High Wing Drilled)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e4.25 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e VMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"Wing Bearing Style\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\" alt=\"wing bearing u-joint\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 5-4211X U-Joint \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(HWD\/HWD)\u003c\/span\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/spicer-15-4111x-u-joint?variant=43898390642915\" title=\"Spicer 15-4111X U-Joint\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/spicer-15-4111x-u-joint?variant=43898390642915\"\u003e15-4111X\u003c\/a\u003e U-Joint (HWD\/HWD)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eNeapco 3-4143 U-Joint\u003cbr\u003eMeritor CP4143X U-Joint \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(HWD\/HWD)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eSpicer 050742000 U-Joint \u003cmeta charset=\"utf-8\"\u003e(Obsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 050742010 U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 050742020 U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 5-4143X U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003c\/span\u003e\u003cbr\u003eAMP4372708, 4C-HWD_GEN, 2D1844, 5K5012, 6K0316, 887737, 944866, D75441, 135764H1, 113-12-00010, R887737, 2040231\u003cbr\u003e\u003c\/p\u003e","published_at":"2017-05-30T08:16:10-04:00","created_at":"2017-05-30T08:16:10-04:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["5-4143x","54111X","BetweenBoltsBullet_1.438\"","Brand_Spicer","Distance Between Bolts_1.438\"","Grease_Greasable","LockUpBullet_4.250\"","Part_U-Joint","Pilot Diameter_4.25\"","Series_MECHANICS 4C","SeriesBullet_4C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":16059,"price_min":16059,"price_max":16059,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":30462700485,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-4111X","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Spicer 5-4111X U-Joint","public_title":null,"options":["Default Title"],"price":16059,"weight":1252,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"023913247522","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2021-03-05at8.03.25AM.png?v=1614949439","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-4143X_Ujoint_Spicer.jpg?v=1614949439"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2021-03-05at8.03.25AM.png?v=1614949439","options":["Title"],"media":[{"alt":null,"id":20540592324759,"position":1,"preview_image":{"aspect_ratio":1.014,"height":876,"width":888,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2021-03-05at8.03.25AM.png?v=1614949439"},"aspect_ratio":1.014,"height":876,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/ScreenShot2021-03-05at8.03.25AM.png?v=1614949439","width":888},{"alt":null,"id":2375173374087,"position":2,"preview_image":{"aspect_ratio":1.235,"height":486,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-4143X_Ujoint_Spicer.jpg?v=1614949439"},"aspect_ratio":1.235,"height":486,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-4143X_Ujoint_Spicer.jpg?v=1614949439","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft 4C Universal Joint\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003eSpicer 4C Series Greasable Wing Type U-joint often used in forklifts and similar applications. All 4 caps are drilled (HWD High Wing Drilled). Includes 8 bolts and washers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Mfg:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItalcardano\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e4C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD (High Wing Drilled)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e4.25 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e VMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"Wing Bearing Style\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\" alt=\"wing bearing u-joint\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 5-4211X U-Joint \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(HWD\/HWD)\u003c\/span\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/spicer-15-4111x-u-joint?variant=43898390642915\" title=\"Spicer 15-4111X U-Joint\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/spicer-15-4111x-u-joint?variant=43898390642915\"\u003e15-4111X\u003c\/a\u003e U-Joint (HWD\/HWD)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eNeapco 3-4143 U-Joint\u003cbr\u003eMeritor CP4143X U-Joint \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e(HWD\/HWD)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003eSpicer 050742000 U-Joint \u003cmeta charset=\"utf-8\"\u003e(Obsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 050742010 U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 050742020 U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003cbr data-mce-fragment=\"1\"\u003eSpicer 5-4143X U-Joint \u003cmeta charset=\"utf-8\"\u003e(\u003cmeta charset=\"utf-8\"\u003eObsolete)\u003c\/span\u003e\u003cbr\u003eAMP4372708, 4C-HWD_GEN, 2D1844, 5K5012, 6K0316, 887737, 944866, D75441, 135764H1, 113-12-00010, R887737, 2040231\u003cbr\u003e\u003c\/p\u003e"}

{"id":3777262747700,"title":"AMI 5-7105XMS U-Joint","handle":"ami_5-7105xms","description":"\u003cinput name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cb\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eAction Machine Inc.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003eLube Fitting In Cross\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eWing Bearing Type:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eWING-HWD\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eMECHANICS 7C\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.938 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e5.841 Inch\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb data-mce-fragment=\"1\"\u003eAlternate Part Number:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/b\u003eNeapco \u003ca title=\"Neapco 5-7126 U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/neapco_5-7126?variant=40990145740951\"\u003e5-7126\u003c\/a\u003e U-Joint\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNeapco 5-7956 U-Joint (No Lube Fitting)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Spicer 5-7105X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-7105x-1?variant=40990026825879\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-7105x-1?variant=40990026825879\"\u003e5-7105X\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint (Obsolete)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-7111x?variant=42034724077795\" title=\"Spicer 5-7111X U-Joint\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/5-7111x?variant=42034724077795\"\u003e5-7111X\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer 15-7111X U-Joint\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAMP4372715, 54500060, 3H6104, 6H2577, 8D7719, AT149827, RE40111, 9023940, 1510973, 1511260, 46408, 122188H1, 630389C91, LA384-21, R12968237, R1992656, R897946, R942735, 9024705, 90132, 840839100, 841949800, TC4412-1\u003c\/span\u003e\u003cbr\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-31T10:27:29-04:00","created_at":"2019-07-31T10:27:29-04:00","vendor":"Action Machine Inc.","type":"Universal Joint Kit","tags":["5-7105X","5-7126","57105XMS","BetweenBoltsBullet_1.938\"","Brand_Action Machine Inc.","Distance Between Bolts_1.938\"","Grease_Greasable","LockUpBullet_5.841\"","Part_U-Joint","Pilot Diameter_5.841\"","Series_MECHANICS 7C","SeriesBullet_7C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":11081,"price_min":11081,"price_max":11081,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29128209203252,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-7105XMS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AMI 5-7105XMS U-Joint","public_title":null,"options":["Default Title"],"price":11081,"weight":4536,"compare_at_price":null,"inventory_quantity":-7,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joint.b_6431de09-d83c-4795-b820-74abd65c92e0.jpg?v=1565115540","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joing.f.jpg?v=1565115540","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_630a6064-5df1-41a1-9ca5-9dde3c6c7149.jpg?v=1565115540","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_7775d8b3-48de-4db4-a6e0-5c70399bd7d5.jpg?v=1565115540"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joint.b_6431de09-d83c-4795-b820-74abd65c92e0.jpg?v=1565115540","options":["Title"],"media":[{"alt":null,"id":3094500212871,"position":1,"preview_image":{"aspect_ratio":1.022,"height":3033,"width":3100,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joint.b_6431de09-d83c-4795-b820-74abd65c92e0.jpg?v=1565115540"},"aspect_ratio":1.022,"height":3033,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joint.b_6431de09-d83c-4795-b820-74abd65c92e0.jpg?v=1565115540","width":3100},{"alt":null,"id":3094500442247,"position":2,"preview_image":{"aspect_ratio":1.018,"height":3210,"width":3267,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joing.f.jpg?v=1565115540"},"aspect_ratio":1.018,"height":3210,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-Joing.f.jpg?v=1565115540","width":3267},{"alt":null,"id":3094500933767,"position":3,"preview_image":{"aspect_ratio":1.839,"height":2623,"width":4823,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_630a6064-5df1-41a1-9ca5-9dde3c6c7149.jpg?v=1565115540"},"aspect_ratio":1.839,"height":2623,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_630a6064-5df1-41a1-9ca5-9dde3c6c7149.jpg?v=1565115540","width":4823},{"alt":null,"id":3073339818119,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_7775d8b3-48de-4db4-a6e0-5c70399bd7d5.jpg?v=1565115540"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_7775d8b3-48de-4db4-a6e0-5c70399bd7d5.jpg?v=1565115540","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cinput name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cb\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eAction Machine Inc.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003eLube Fitting In Cross\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eWing Bearing Type:\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eWING-HWD\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eMECHANICS 7C\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.938 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e5.841 Inch\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003chr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb data-mce-fragment=\"1\"\u003eAlternate Part Number:\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/b\u003eNeapco \u003ca title=\"Neapco 5-7126 U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/neapco_5-7126?variant=40990145740951\"\u003e5-7126\u003c\/a\u003e U-Joint\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNeapco 5-7956 U-Joint (No Lube Fitting)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca data-mce-fragment=\"1\" title=\"Spicer 5-7105X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-7105x-1?variant=40990026825879\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/collections\/wing-u-joint\/products\/5-7105x-1?variant=40990026825879\"\u003e5-7105X\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint (Obsolete)\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-7111x?variant=42034724077795\" title=\"Spicer 5-7111X U-Joint\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/products\/5-7111x?variant=42034724077795\"\u003e5-7111X\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e U-Joint\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer 15-7111X U-Joint\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAMP4372715, 54500060, 3H6104, 6H2577, 8D7719, AT149827, RE40111, 9023940, 1510973, 1511260, 46408, 122188H1, 630389C91, LA384-21, R12968237, R1992656, R897946, R942735, 9024705, 90132, 840839100, 841949800, TC4412-1\u003c\/span\u003e\u003cbr\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3774373003316,"title":"AMI 5-7000XMS U-Joint","handle":"ami_5-7000xms","description":"\u003cstrong\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003c\/strong\u003e\n\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eMeasuring Guides\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAction Machine Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nYes, Greaseable\u003cbr\u003e\nLube Fitting In Cross\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWing Bearing Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWING-DWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMECHANICS 7C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.938 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.841 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e(C)\u003c\/td\u003e\n\u003ctd\u003ePilot Diameter \/ Distance over Caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e(S)\u003c\/td\u003e\n\u003ctd\u003eDistance Between Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cstrong\u003eThis wing U-Joint is equivalent to:\u003cbr\u003e\u003c\/strong\u003eNeapco\u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/neapco_5-7205?variant=40996185571479\" title=\"Neapco 5-7205 U-Joint\"\u003e 5-7205 \u003c\/a\u003eU-Joint (UPC 00083869572055)\u003cbr\u003eSpicer 5-7000X U-Joint (LWT\/LWT) \u003cbr\u003eMeritor CP72N DWT U-Joint\n","published_at":"2019-07-29T15:22:24-04:00","created_at":"2019-07-29T15:22:24-04:00","vendor":"Action Machine Inc.","type":"Universal Joint Kit","tags":["5-7000X","5-7205","57000XMS","BetweenBoltsBullet_1.938\"","Brand_Action Machine Inc.","Distance Between Bolts_1.938\"","Grease_Greasable","LockUpBullet_5.841\"","Part_U-Joint","Pilot Diameter_5.841\"","Series_MECHANICS 7C","SeriesBullet_7C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_DWT"],"price":10000,"price_min":10000,"price_max":10000,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29114792149044,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMI_5-7000XMS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AMI 5-7000XMS U-Joint","public_title":null,"options":["Default Title"],"price":10000,"weight":4536,"compare_at_price":null,"inventory_quantity":-7,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.3.4U-Joint.jpg?v=1565023532","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.U-Joint.jpg?v=1565023532","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.bolts.jpg?v=1565023532","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973.jpg?v=1565023532"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.3.4U-Joint.jpg?v=1565023532","options":["Title"],"media":[{"alt":null,"id":3088908124295,"position":1,"preview_image":{"aspect_ratio":0.919,"height":3311,"width":3044,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.3.4U-Joint.jpg?v=1565023532"},"aspect_ratio":0.919,"height":3311,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.3.4U-Joint.jpg?v=1565023532","width":3044},{"alt":null,"id":3088910254215,"position":2,"preview_image":{"aspect_ratio":1.077,"height":3462,"width":3729,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.U-Joint.jpg?v=1565023532"},"aspect_ratio":1.077,"height":3462,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.U-Joint.jpg?v=1565023532","width":3729},{"alt":null,"id":3088908681351,"position":3,"preview_image":{"aspect_ratio":2.352,"height":1986,"width":4671,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.bolts.jpg?v=1565023532"},"aspect_ratio":2.352,"height":1986,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-7000xms.bolts.jpg?v=1565023532","width":4671},{"alt":null,"id":3071848153223,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973.jpg?v=1565023532"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973.jpg?v=1565023532","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cstrong\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003c\/strong\u003e\n\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eMeasuring Guides\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAction Machine Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nYes, Greaseable\u003cbr\u003e\nLube Fitting In Cross\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWing Bearing Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWING-DWT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMECHANICS 7C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.938 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.841 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e(C)\u003c\/td\u003e\n\u003ctd\u003ePilot Diameter \/ Distance over Caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e(S)\u003c\/td\u003e\n\u003ctd\u003eDistance Between Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\u003cstrong\u003eThis wing U-Joint is equivalent to:\u003cbr\u003e\u003c\/strong\u003eNeapco\u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/neapco_5-7205?variant=40996185571479\" title=\"Neapco 5-7205 U-Joint\"\u003e 5-7205 \u003c\/a\u003eU-Joint (UPC 00083869572055)\u003cbr\u003eSpicer 5-7000X U-Joint (LWT\/LWT) \u003cbr\u003eMeritor CP72N DWT U-Joint\n"}

{"id":3777295908916,"title":"AMI 5-8516XMS U-Joint","handle":"ami_5-8516xms","description":"\u003cinput id=\"tab1a\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1a\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2a\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab2a\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3a\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3a\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eAction Machine Inc.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanics 8.5C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2.812 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e6.500 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1a {\n display: none;\n}\n#tab2a {\n display: none;\n}\n#tab3a {\n display: none;\n}\n#tab4a {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1a:checked ~ #content1,\n#tab2a:checked ~ #content2,\n#tab3a:checked ~ #content3,\n#tab4a:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-31T11:24:01-04:00","created_at":"2019-07-31T11:24:01-04:00","vendor":"Action Machine Inc.","type":"Universal Joint Kit","tags":["5-8516X","58516XMS","BetweenBoltsBullet_2.812\"","Brand_Action Machine Inc.","Distance Between Bolts_2.812\"","Grease_Greasable","LockUpBullet_6.500\"","Part_U-Joint","Pilot Diameter_6.500\"","Series_MECHANICS 8.5C","SeriesBullet_8.5C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":17778,"price_min":17778,"price_max":17778,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29128480325684,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMI_5-8516XMS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AMI 5-8516XMS U-Joint","public_title":null,"options":["Default Title"],"price":17778,"weight":6350,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.F_e04b6fc5-2279-435a-9082-df709c06a2d7.jpg?v=1570137152","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.b_4d8c3c7b-5541-4241-ab04-87912c14eaba.jpg?v=1570137152","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_3a87a964-ae27-4ed3-9714-679d8c1f596d.jpg?v=1570137151","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_ac3978b8-2146-4dbd-8fa3-f4a5589e23ec.jpg?v=1570131173"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.F_e04b6fc5-2279-435a-9082-df709c06a2d7.jpg?v=1570137152","options":["Title"],"media":[{"alt":null,"id":3100159770759,"position":1,"preview_image":{"aspect_ratio":1.023,"height":3240,"width":3314,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.F_e04b6fc5-2279-435a-9082-df709c06a2d7.jpg?v=1570137152"},"aspect_ratio":1.023,"height":3240,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.F_e04b6fc5-2279-435a-9082-df709c06a2d7.jpg?v=1570137152","width":3314},{"alt":null,"id":3100161147015,"position":2,"preview_image":{"aspect_ratio":1.037,"height":3429,"width":3555,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.b_4d8c3c7b-5541-4241-ab04-87912c14eaba.jpg?v=1570137152"},"aspect_ratio":1.037,"height":3429,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/U-joint.b_4d8c3c7b-5541-4241-ab04-87912c14eaba.jpg?v=1570137152","width":3555},{"alt":null,"id":3100158886023,"position":3,"preview_image":{"aspect_ratio":2.035,"height":2368,"width":4820,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_3a87a964-ae27-4ed3-9714-679d8c1f596d.jpg?v=1570137151"},"aspect_ratio":2.035,"height":2368,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/bolts_3a87a964-ae27-4ed3-9714-679d8c1f596d.jpg?v=1570137151","width":4820},{"alt":null,"id":3073411416199,"position":4,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_ac3978b8-2146-4dbd-8fa3-f4a5589e23ec.jpg?v=1570131173"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Drawing_2_9973_ac3978b8-2146-4dbd-8fa3-f4a5589e23ec.jpg?v=1570131173","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cinput id=\"tab1a\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1a\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2a\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab2a\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3a\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3a\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eAction Machine Inc. Wing Bearing Style Universal Joint\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003et\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003csection\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eAction Machine Inc.\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanics 8.5C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2.812 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e6.500 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1a {\n display: none;\n}\n#tab2a {\n display: none;\n}\n#tab3a {\n display: none;\n}\n#tab4a {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1a:checked ~ #content1,\n#tab2a:checked ~ #content2,\n#tab3a:checked ~ #content3,\n#tab4a:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3762743869492,"title":"Neapco 3-3152 U-Joint","handle":"neapco_3-3152","description":"\u003ch1 class=\"p1\"\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003eThis part is drop shipped from the manufacturer and will ship at the earliest available time. Average time to ship is 1-3 business days from when you place the order. You can contact Action Machine Inc. to confirm product availability and for an estimated time of arrival. \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e\u003cspan class=\"s1\"\u003eCHAT\u003c\/span\u003e\u003c\/a\u003e | \u003ca href=\"tel:(574)287-9650\"\u003e\u003cspan class=\"s1\"\u003e(574)287-9650\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003eLube Fitting In Cross\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWing Bearing Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eWing-LWT\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 3CL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e3.563 Inch\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 3-3144X U-Joint (Obsolete)\u003cbr\u003eSpicer 5-3000X U-Joint\u003cbr\u003eMeritor CP3000 U-Joint\u003cbr\u003eAMP4372705, D73646, 5996, 9K1971, 2000934, 1502639, 1500165, D704096, D82809, 26601, 53020A","published_at":"2019-07-22T14:10:20-04:00","created_at":"2019-07-22T14:10:20-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["33152","BetweenBoltsBullet_1.438\"","Brand_Neapco","Distance Between Bolts_1.438\"","Grease_Greasable","LockUpBullet_3.563\"","Part_U-Joint","Pilot Diameter_3.563\"","Series_MECHANICS 3C","SeriesBullet_3C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_LWT"],"price":8036,"price_min":8036,"price_max":8036,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29044993884212,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3-3152","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 3-3152 U-Joint","public_title":null,"options":["Default Title"],"price":8036,"weight":4536,"compare_at_price":null,"inventory_quantity":-5,"inventory_management":null,"inventory_policy":"deny","barcode":"00083869331522","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-3152.jpg?v=1563819112"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-3152.jpg?v=1563819112","options":["Title"],"media":[{"alt":null,"id":3057342939271,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-3152.jpg?v=1563819112"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-3152.jpg?v=1563819112","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1 class=\"p1\"\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cp class=\"p1\"\u003eThis part is drop shipped from the manufacturer and will ship at the earliest available time. Average time to ship is 1-3 business days from when you place the order. You can contact Action Machine Inc. to confirm product availability and for an estimated time of arrival. \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e\u003cspan class=\"s1\"\u003eCHAT\u003c\/span\u003e\u003c\/a\u003e | \u003ca href=\"tel:(574)287-9650\"\u003e\u003cspan class=\"s1\"\u003e(574)287-9650\u003c\/span\u003e\u003c\/a\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003eLube Fitting In Cross\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWing Bearing Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003eWing-LWT\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 3CL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e3.563 Inch\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\" data-mce-style=\"float: none; margin: 5px;\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e\u003cbr\u003eSpicer 3-3144X U-Joint (Obsolete)\u003cbr\u003eSpicer 5-3000X U-Joint\u003cbr\u003eMeritor CP3000 U-Joint\u003cbr\u003eAMP4372705, D73646, 5996, 9K1971, 2000934, 1502639, 1500165, D704096, D82809, 26601, 53020A"}

{"id":3762680791092,"title":"Neapco 2-3102 U-Joint","handle":"neapco_2-3102","description":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Cross\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 3CRL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan class=\"ng-binding\"\u003eCross 1\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3CRL\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e3R\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003eWING-LWT\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eROUND-ISR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eCap Measurement:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDistance Between Bolts: \u003c\/span\u003e\u003cbr\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eBearing Cap Diameter: \u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e1.125 Inch\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eU-Joint Width:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003ePilot Diameter:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3.562 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eWidth:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e2.562 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ISR_WB_large.png?v=1563990491\" alt=\"Inside Snap Ring and Wing U-Joint\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-3264x?variant=43896071061731\" title=\"Spicer 5-3264X ISR \/ Wing U-Joint\"\u003e5-3264X\u003c\/a\u003e U-Joint\u003cbr\u003eMeritor CP3012 U-Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer 5-3012X ISR \/ Wing U-Joint (TBC)\u003c\/span\u003e\u003cbr\u003e","published_at":"2019-07-22T13:33:14-04:00","created_at":"2019-07-22T13:33:14-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["23102","BetweenBoltsBullet_1.438\"","Brand_Neapco","Conversion","Distance Between Bolts_1.438\"","Grease_Greasable","LockUpBullet_2.562\" X 3.562\"","Part_U-Joint","Pilot Diameter_3.562\"","Series_3R","Series_MECHANICS 3C","SeriesBullet_3CRL X 3R","U-Joint Type_Wing","U-Joint Type_Wing \/ Inside Snap Ring","Wing Bearing Type_LWT \/ ISR"],"price":6209,"price_min":6209,"price_max":6209,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29044846559284,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"2-3102","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 2-3102 U-Joint","public_title":null,"options":["Default Title"],"price":6209,"weight":4536,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":null,"inventory_policy":"deny","barcode":"00083869231020","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-3102.jpg?v=1563817189"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-3102.jpg?v=1563817189","options":["Title"],"media":[{"alt":null,"id":3057304633479,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-3102.jpg?v=1563817189"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/2-3102.jpg?v=1563817189","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Cross\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\"\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 3CRL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan class=\"ng-binding\"\u003eCross 1\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSeries:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3CRL\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e3R\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003eWING-LWT\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eROUND-ISR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eCap Measurement:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eDistance Between Bolts: \u003c\/span\u003e\u003cbr\u003e1.438 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eBearing Cap Diameter: \u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e1.125 Inch\u003cbr\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eU-Joint Width:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003ePilot Diameter:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3.562 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eWidth:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e2.562 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ISR_WB_large.png?v=1563990491\" alt=\"Inside Snap Ring and Wing U-Joint\"\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\" data-mce-style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\" data-mce-style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-3264x?variant=43896071061731\" title=\"Spicer 5-3264X ISR \/ Wing U-Joint\"\u003e5-3264X\u003c\/a\u003e U-Joint\u003cbr\u003eMeritor CP3012 U-Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer 5-3012X ISR \/ Wing U-Joint (TBC)\u003c\/span\u003e\u003cbr\u003e"}

{"id":3759731408948,"title":"Neapco 1-2171 U-Joint","handle":"neapco_1-2171","description":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Bearing\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWing Bearing Type\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWing-LWT\u003c\/span\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 2CL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.312 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e3.125 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer 5-781X U-Joint (Greasable) \u003cbr\u003eSpicer 5-2002X U-Joint (Non-Greasable)","published_at":"2019-07-19T15:18:09-04:00","created_at":"2019-07-19T15:18:09-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["12171","BetweenBoltsBullet_1.312\"","Brand_Neapco","Distance Between Bolts_1.312\"","Grease_Greasable","LockUpBullet_3.125\"","Part_U-Joint","Pilot Diameter_3.125\"","Series_MECHANICS 2C","SeriesBullet_2C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_LWT"],"price":7314,"price_min":7314,"price_max":7314,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":29025480212532,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1-2171","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neapco 1-2171 U-Joint","public_title":null,"options":["Default Title"],"price":7314,"weight":794,"compare_at_price":null,"inventory_quantity":-4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"00083869121710","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/1-2171.jpg?v=1563564281"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/1-2171.jpg?v=1563564281","options":["Title"],"media":[{"alt":null,"id":3050504945799,"position":1,"preview_image":{"aspect_ratio":1.0,"height":220,"width":220,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/1-2171.jpg?v=1563564281"},"aspect_ratio":1.0,"height":220,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/1-2171.jpg?v=1563564281","width":220}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft Universal Joint\u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan class=\"ng-binding\"\u003eYes, Greaseable\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan class=\"ng-binding\"\u003e\u003cspan\u003eLube Fitting In Bearing\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWing Bearing Type\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWing-LWT\u003c\/span\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 2CL\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e1.312 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e3.125 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer 5-781X U-Joint (Greasable) \u003cbr\u003eSpicer 5-2002X U-Joint (Non-Greasable)"}

{"id":552821293108,"title":"Spicer 5-10211X U-Joint","handle":"5-10211x","description":"\u003ch1\u003eDriveshaft Universal Joint 10C Series \u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNon-Greaseable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Mfg:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItalcardano\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S1):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.626 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S2):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.626 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type (1):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type (2):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e8.374 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" ng-if=\"part.partData.originCountry\"\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan class=\"label-name ng-binding\"\u003eCountry of Origin:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing Bearing Style U-Joint Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" alt=\"Measuring a yoke\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing U-Joint\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_medium.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Options:\u003c\/strong\u003e\u003cbr\u003eAMI 10C U-Joint\u003cbr\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/6-1005?variant=7080688844852\" title=\"Neapco 6-1005 U-Joint\"\u003e6-1005\u003c\/a\u003e U-Joint\u003cbr\u003eSpicer 050417000 \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e050A53000 \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e5-10211X \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e5-10211XM \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint (Metric)\u003cbr\u003eSpicer \u003ca title=\"Spicer 5-10111X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-10111x?variant=43926102376675\"\u003e5-10111X\u003c\/a\u003e U-Joint (Greasable)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-08-02T14:33:33-04:00","created_at":"2018-03-09T14:57:17-05:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["510211X","BetweenBoltsBullet_3.626\"","Brand_Spicer","Distance Between Bolts C2_3.626\"","Distance Between Bolts_3.626\"","Grease_Non-Greasable","LockUpBullet_8.374\"","Part_U-Joint","Pilot Diameter_8.374\"","Series_MECHANICS 10C","SeriesBullet_10C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":118448,"price_min":118448,"price_max":118448,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6994763251764,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-10211X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spicer 5-10211X U-Joint","public_title":null,"options":["Default Title"],"price":118448,"weight":12179,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"deny","barcode":"023913437251","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Top_8008.png?v=1520625487"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Top_8008.png?v=1520625487","options":["Title"],"media":[{"alt":null,"id":2521897730183,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Top_8008.png?v=1520625487"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-10211X_Top_8008.png?v=1520625487","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch1\u003eDriveshaft Universal Joint 10C Series \u003c\/h1\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNon-Greaseable\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Mfg:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItalcardano\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S1):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.626 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S2):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.626 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type (1):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eWb Type (2):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e8.374 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" ng-if=\"part.partData.originCountry\"\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cspan class=\"label-name ng-binding\"\u003eCountry of Origin:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing Bearing Style U-Joint Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" alt=\"Wing Yoke Diagram\"\u003e\u003cimg style=\"float: none; margin: 5px;\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" alt=\"Measuring a yoke\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Wing U-Joint\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_medium.png?v=1563889396\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eAlternate Part Options:\u003c\/strong\u003e\u003cbr\u003eAMI 10C U-Joint\u003cbr\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/6-1005?variant=7080688844852\" title=\"Neapco 6-1005 U-Joint\"\u003e6-1005\u003c\/a\u003e U-Joint\u003cbr\u003eSpicer 050417000 \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e050A53000 \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e5-10211X \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpicer \u003c\/span\u003e5-10211XM \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eU-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eJ\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eoint (Metric)\u003cbr\u003eSpicer \u003ca title=\"Spicer 5-10111X U-Joint\" href=\"https:\/\/www.actionmachineinc.com\/products\/5-10111x?variant=43926102376675\"\u003e5-10111X\u003c\/a\u003e U-Joint (Greasable)\u003c\/span\u003e\u003c\/p\u003e"}

{"id":546231746612,"title":"Spicer 5-11111X U-Joint","handle":"5-11111x","description":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style (HWD\/HWD)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e11C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts \u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.5 Inch \u003cmeta charset=\"utf-8\"\u003e(S1) \/ \u003cmeta charset=\"utf-8\"\u003e3.5\u003cspan data-mce-fragment=\"1\"\u003e Inch \u003cmeta charset=\"utf-8\"\u003e(S2)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e8.75\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e Inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\" alt=\"Wing Bearing Style U-Joint Diagram\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_medium.png?v=1563889396\" alt=\"Wing U-Joint\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp data-mce-fragment=\"1\" class=\"p1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eAlternate Part Number:\u003cbr\u003e\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eSpicer 050435000 U-Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eSpicer 050A55000 U-Joint\u003c\/span\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-11211x?variant=6965185380404\" title=\"Spicer 5-11211X U-Joint\"\u003e5-11211X\u003c\/a\u003e U-Joint (Non-Greasable)\u003c\/span\u003e\u003c\/p\u003e","published_at":"2017-05-30T08:16:09-04:00","created_at":"2018-03-07T09:15:05-05:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["511111X","BetweenBoltsBullet_3.5\"","Brand_Spicer","Distance Between Bolts_3.500\"","Grease_Greasable","LockUpBullet_8.75\"","Part_U-Joint","Series_MECHANICS 11C","SeriesBullet_11C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":63940,"price_min":63940,"price_max":63940,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6965278867508,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-11111X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spicer 5-11111X U-Joint","public_title":null,"options":["Default Title"],"price":63940,"weight":13508,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"023913437268","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Top_8000.png?v=1520432158","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Side_8001.png?v=1520432158"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Top_8000.png?v=1520432158","options":["Title"],"media":[{"alt":null,"id":2519672553607,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Top_8000.png?v=1520432158"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Top_8000.png?v=1520432158","width":600},{"alt":null,"id":2519672586375,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Side_8001.png?v=1520432158"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-11111X_Side_8001.png?v=1520432158","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpicer® Wing™Series:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor Performance that begins where the pavement ends. Spicer wing bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating costs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style (HWD\/HWD)\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e11C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts \u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.5 Inch \u003cmeta charset=\"utf-8\"\u003e(S1) \/ \u003cmeta charset=\"utf-8\"\u003e3.5\u003cspan data-mce-fragment=\"1\"\u003e Inch \u003cmeta charset=\"utf-8\"\u003e(S2)\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e8.75\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e Inch\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_large.png?v=1563889396\" alt=\"Wing Bearing Style U-Joint Diagram\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Bearing_Style_U-Joint_medium.png?v=1563889396\" alt=\"Wing U-Joint\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\n\u003cp data-mce-fragment=\"1\" class=\"p1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eAlternate Part Number:\u003cbr\u003e\u003c\/b\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eSpicer 050435000 U-Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eSpicer 050A55000 U-Joint\u003c\/span\u003e\u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-11211x?variant=6965185380404\" title=\"Spicer 5-11211X U-Joint\"\u003e5-11211X\u003c\/a\u003e U-Joint (Non-Greasable)\u003c\/span\u003e\u003c\/p\u003e"}

{"id":7606791078115,"title":"AMI 5-221X U-Joint","handle":"ami_a5-221x","description":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e \u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1550\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e6C \/ 62N\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eWing Bearing Style\u003cbr\u003e\u003c\/span\u003eHWD, Round\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e(D): 1.375 Inch (34.9 mm)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCap Holes Centres:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eN\/A\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e(S): 1.689 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e42.9 mm)\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cstrong\u003eLock Up \/ Length (G):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e*Snap Ring to Snap Ring\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e4.969 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e126.1 mm)\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eN\/A\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePilot Length:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eN\/A\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e5.531 \u003cmeta charset=\"utf-8\"\u003eInch (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e140.5 mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cb\u003ePilot Diameter:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" colspan=\"2\" data-mce-style=\"height: 17px;\"\u003e5.531 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eNon-Greaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eYes \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e- \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003eSnap Ring \u0026amp; Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eEach \/ Qty 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e VMRS: 024002046 \u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"Outside Snap Ring, Wing U-joint\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"Wing U-joint \/ Outside snap ring\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003ePilot Diameter\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (G)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDistance over Caps\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDistance Between Bolts\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (D)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCap Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/6c-3x?variant=38130353733\" title=\"Spicer 6C-3X U-Joint\"\u003e6C-3X\u003c\/a\u003e Universal Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAMP4372720, 840733100, 840599700, 840548600, 33535\u003c\/span\u003e\u003cbr\u003e","published_at":"2022-03-04T12:37:49-05:00","created_at":"2022-03-04T12:37:49-05:00","vendor":"Action Machine Inc.","type":"Universal Joint Kit","tags":["6C3X","A5-221X","BetweenBoltsBullet_1.375\" X 1.689\"","Brand_Action Machine Inc.","conversion","Grease_Greasable","KDA","LockUpBullet_4.969\" X 5.531\"","Part_U-Joint","Pilot Diameter_5.531\"","Series_1550","Series_1550 X 6C","Series_62N","Series_MECHANICS 6C","SeriesBullet_1550 X 6C\/62N","Snap Ring to Snap Ring_4.969\"","Snap Ring to Snap Ring_5.531\"","U-Joint Type_Wing","U-Joint Type_Wing \/ Outside Snap Ring","Wing Bearing Type_HWD \/ OSR"],"price":7286,"price_min":7286,"price_max":7286,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":42558596055267,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AMI_5-221X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"AMI 5-221X U-Joint","public_title":null,"options":["Default Title"],"price":7286,"weight":1860,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0267copy.jpg?v=1646420923","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0268copy.jpg?v=1646420923","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0269copy.jpg?v=1646420924"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0267copy.jpg?v=1646420923","options":["Title"],"media":[{"alt":null,"id":29463725474019,"position":1,"preview_image":{"aspect_ratio":1.045,"height":3073,"width":3210,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0267copy.jpg?v=1646420923"},"aspect_ratio":1.045,"height":3073,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0267copy.jpg?v=1646420923","width":3210},{"alt":null,"id":29463725506787,"position":2,"preview_image":{"aspect_ratio":1.102,"height":3274,"width":3609,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0268copy.jpg?v=1646420923"},"aspect_ratio":1.102,"height":3274,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0268copy.jpg?v=1646420923","width":3609},{"alt":null,"id":29463725539555,"position":3,"preview_image":{"aspect_ratio":1.106,"height":3522,"width":3894,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0269copy.jpg?v=1646420924"},"aspect_ratio":1.106,"height":3522,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/DSC_0269copy.jpg?v=1646420924","width":3894}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e  \u003c!-- ***** 1 ***** --\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e \u003cstrong\u003eSeries Innovations Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e• Forged cross \u003cbr\u003e• Case hardening process for strength \u003cbr\u003e• Sealed slip spline system \u003cbr\u003e• Triple lip seal, thrust washer, and seal guard package \u003cbr\u003e• Reduced maintenance \u003cbr\u003e• Increased torque capacity\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eSpicer\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreaseable\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eYes\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eType\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eInside Snap Ring \/ Wing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Mfg\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechancis\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e2C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eConverts This Series\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eTo This Series\u003c\/td\u003e\n\u003ctd\u003e2R\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eDistance Between Bolts (S2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.926\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (1)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eWb Type (2)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eHWD\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003ePilot Diameter (C)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e10.235\"\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eItaly\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cbr\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eCross 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSeries Conversion:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1550\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e6C \/ 62N\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eOutside Snap Ring (OSR)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eWing Bearing Style\u003cbr\u003e\u003c\/span\u003eHWD, Round\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e(D): 1.375 Inch (34.9 mm)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd\u003eN\/A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eCap Holes Centres:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eN\/A\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e(S): 1.689 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e42.9 mm)\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cstrong\u003eLock Up \/ Length (G):\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e*Snap Ring to Snap Ring\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e4.969 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e126.1 mm)\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eN\/A\u003c\/span\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003ePilot Length:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eN\/A\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"height: 34px;\" data-mce-style=\"height: 34px;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e5.531 \u003cmeta charset=\"utf-8\"\u003eInch (\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e140.5 mm)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cb\u003ePilot Diameter:\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 17px;\" colspan=\"2\" data-mce-style=\"height: 17px;\"\u003e5.531 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eNon-Greaseable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eSnap Rings Included:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eYes \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003e- \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" class=\"ng-binding\"\u003eSnap Ring \u0026amp; Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\n\u003ctd style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003e\u003cstrong\u003ePackage:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd colspan=\"2\" style=\"height: 17px;\" data-mce-style=\"height: 17px;\"\u003eEach \/ Qty 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e VMRS: 024002046 \u003c\/em\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"Outside Snap Ring, Wing U-joint\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003cimg alt=\"Measuring a yoke\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Screen_Shot_2019-07-23_at_9.57.45_AM_medium.png?v=1563890293\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/outside_snap_ring_wing_u-joint_large.jpg?v=1564063133\" alt=\"Wing U-joint \/ Outside snap ring\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003ePilot Diameter\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (G)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDistance over Caps\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eDistance Between Bolts\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (D)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eCap Diameter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cstrong\u003eAlternate Part Number:\u003c\/strong\u003e \u003cbr\u003eSpicer \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/6c-3x?variant=38130353733\" title=\"Spicer 6C-3X U-Joint\"\u003e6C-3X\u003c\/a\u003e Universal Joint\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAMP4372720, 840733100, 840599700, 840548600, 33535\u003c\/span\u003e\u003cbr\u003e"}