Free ground shipping on all driveshafts and orders over $100 within the continental USA! 

{"id":568608686132,"title":"Neapco 6-1538 U-Joint","handle":"6-1538","description":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\" mce-data-marked=\"1\"\u003e\u003cspan class=\"ng-binding\" mce-data-marked=\"1\"\u003eno\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 15C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.928 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e10.23 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2017-08-02T14:33:33-04:00","created_at":"2018-03-13T12:03:55-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["61538","BetweenBoltsBullet_3.938\"","Brand_Neapco","Distance Between Bolts_3.938\"","Grease_Non-Greasable","LockUpBullet_10.23\"","Part_U-Joint","Pilot Diameter_10.23\"","Series_MECHANICS 15C","SeriesBullet_15C","U-Joint Type_Wing","UJointTypeBullet_Wing","Wing Bearing Type_HWD"],"price":156342,"price_min":156342,"price_max":156342,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7079836385332,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"6-1538","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 6-1538 U-Joint","public_title":null,"options":["Default Title"],"price":156342,"weight":17921,"compare_at_price":null,"inventory_quantity":-1,"inventory_management":null,"inventory_policy":"deny","barcode":"00083869016443","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/6-1538_8e957ea8-7273-48ea-bffc-f2023237f745.jpg?v=1520957635"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/6-1538_8e957ea8-7273-48ea-bffc-f2023237f745.jpg?v=1520957635","options":["Title"],"media":[{"alt":null,"id":2530207006855,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/6-1538_8e957ea8-7273-48ea-bffc-f2023237f745.jpg?v=1520957635"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/6-1538_8e957ea8-7273-48ea-bffc-f2023237f745.jpg?v=1520957635","width":400}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eMeasuring Guides\u003c\/label\u003e \n\u003csection id=\"content1\"\u003e\u003cstrong\u003eNeapco Wing Bearing Style Universal Joint\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003e• Bearing cups are made from formed bar stock or precision forgings.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Bearing surfaces are case hardened to a uniform depth for strength and durability.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Mounting key and bolt holes are machined for a \u003c\/span\u003e\u003cspan\u003eprecise fit to mating parts.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Needle bearings are made from the highest \u003c\/span\u003e\u003cspan\u003equality bearing steel and are sized for \u003c\/span\u003e\u003cspan\u003emaximum life and load carrying capabilities.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Seals are made of nitrile rubber or cork for \u003c\/span\u003e\u003cspan\u003eoptimal grease retention and contaminant \u003c\/span\u003e\u003cspan\u003eexclusion.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Lubrication channels and grooves are provided \u003c\/span\u003e\u003cspan\u003eto allow positive greasing of each bearing cup \u003c\/span\u003e\u003cspan\u003efor extended joint life.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e• Trunnions are put through a deep carburization \u003c\/span\u003e\u003cspan\u003eprocess and ground to precision tolerances to \u003c\/span\u003e\u003cspan\u003einsure maximum life expectancy and smooth \u003c\/span\u003e\u003cspan\u003erunning surfaces.\u003c\/span\u003e\u003cspan\u003e \u003cbr\u003e• Journal trunnion ends are ground to length to \u003c\/span\u003e\u003cspan\u003einsure proper fit of mating parts.\u003c\/span\u003e Neapco\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e*\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody class=\"pzv-tbl-tc1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBrand:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eNeapco\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGreaseable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\" mce-data-marked=\"1\"\u003e\u003cspan class=\"ng-binding\" mce-data-marked=\"1\"\u003eno\u003c\/span\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eWing Bearing Style\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Wing Bearing Type:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eWING-HWD\u003c\/span\u003e\u003cbr\u003e\u003cspan class=\"ng-binding\"\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003eMechanics 15C\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eDistance Between Bolts (S):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan class=\"ng-binding\"\u003e3.928 Inch\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003ePilot Diameter (C):\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e10.23 Inch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003ch3\u003e\u003cstrong\u003eHow to Measure a Yoke\u003cbr\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp style=\"text-align: left;\"\u003eMeasure across the inside of the pilot diameter \u003cbr\u003eCAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. \u003cbr\u003e\u003cimg alt=\"Wing Yoke Diagram\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Wing_Yoke_diagam_medium.png?v=1563890058\" style=\"float: none; margin: 5px;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eHow to Measure a Wing U-Joint\u003c\/h3\u003e\n\u003cp\u003e  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps \/ Pilot Diameter. \u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/5-12211X_Drawing_2_9973_large.jpg?v=1520605457\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e (C)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePilot Diameter \/ Distance over Caps\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e (S)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eDistance Between Bolts\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id='\"content4”'\u003e\n\u003cp\u003e****\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}
  1. Home
  2. Universal Joints
  3. Neapco 6-1538 U-Joint

Neapco 6-1538 U-Joint

Vendor: Neapco, Sku: 6-1538

Previous Product | Next Product
Product Description
 
Neapco Wing Bearing Style Universal Joint
• Bearing cups are made from formed bar stock or precision forgings.
• Bearing surfaces are case hardened to a uniform depth for strength and durability.
• Mounting key and bolt holes are machined for a precise fit to mating parts.
• Needle bearings are made from the highest quality bearing steel and are sized for maximum life and load carrying capabilities.
• Seals are made of nitrile rubber or cork for optimal grease retention and contaminant exclusion.
• Lubrication channels and grooves are provided to allow positive greasing of each bearing cup for extended joint life.
• Trunnions are put through a deep carburization process and ground to precision tolerances to insure maximum life expectancy and smooth running surfaces.
• Journal trunnion ends are ground to length to insure proper fit of mating parts. Neapco

*

 

Brand: Neapco
Greaseable: no
Type: Wing Bearing Style
Wing Bearing Type:
WING-HWD
OEM Series: Mechanics 15C
Distance Between Bolts (S): 3.928 Inch
Pilot Diameter (C):
10.23 Inch

VMRS: 024-001-004

How to Measure a Yoke

Measure across the inside of the pilot diameter
CAUTION: Make sure your spicer ruler or caliper is directly over the center of the bolt holes and pilot hole on the yoke. 
Wing Yoke Diagram

How to Measure a Wing U-Joint

  We recommend using a caliper or micrometer to most accurately measure u-joints. U-joint caps must be compressed when measuring dimension over the caps / Pilot Diameter. 

 (C)
Pilot Diameter / Distance over Caps
 (S)
Distance Between Bolts

****

Sku: 6-1538
Vendor: Neapco
$1,563.42
Maximum quantity available reached.

DETAILS

OEM Series:		 15C
Manufacturer: Neapco
Greasable: Non-Greasable
Bearing Type: Wing HWD
Manufacturer Part Number: 6-1538
Distance Between Bolts: 3.938"
Pilot Diameter (1): 10.23"
OEM/Alternate Part Number:
00083869016443
.

Related Products