Transmission and Transfer Case Slip Yokes by Dimensions
Use this guide if you don't know your transmission or transfer case model.
|
|
|
A.) Spline Diameter Measure the major diameter (deepest part) inside the slip yoke or the spline outside diameter on the vehicle's transmission or transfer case. |
|
B.) Barrel Outside Diameter Measure the outside of the barrel diameter on the slip yoke or the inside diameter of the trans seal. |
|
C.) Spline Count Each spline counts as one spline. Some slip yokes have blank spaces called blind spots. Count each blind spot as one spline. |
|
D.) Slip Yoke Length Measure from the end of slip to center of u-joint. |
|
U-Joint Series |
Trans Slip Yoke by Dimensions
PTI 4103-309 Trans Slip Yoke
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions. This slip yoke does NOT fit Mopar 727 or A833 transmissions. It does fit Transmission Models: , 45RFE , 46RH , 47RE , 47RH , 48DG8 , 48RE , 545DGQ , 545RFE , 65RFE , A518
- Series: 1410 Series: 1415
- Spline: 30
- Barrel OD: 1.68"
- U-joint: 1.188" X 4.178"
- Length: 9.05"
- Outside Snap Ring
- Series: 1410 Series: 1415
- Spline: 30
- Barrel OD: 1.68"
- U-joint: 1.188" X 4.178"
- Length: 9.05"
- Outside Snap Ring
AAM 40038546 Trans Slip Yoke
Transmission Applications: Fits various 30 spline output shafts for Dodge transmissions. This slip yoke does NOT fit Mopar 727 or A833 transmissions. It does fit Transmission Models: , 45RFE , 46RH , 47RE , 47RH , 48DG8 , 48RE , 545DGQ , 545RFE , 65RFE , A518
- Series: 1410 Series: 1415
- Spline: 30
- Barrel OD: 1.68"
- U-joint: 1.188" X 4.178"
- Length: 9.05"
- Outside Snap Ring
- Series: 1410 Series: 1415
- Spline: 30
- Barrel OD: 1.68"
- U-joint: 1.188" X 4.178"
- Length: 9.05"
- Outside Snap Ring
