Free ground shipping on all driveshafts and orders over $100 within the continental USA! 
ALL custom and conversion driveshafts are on sale through the end of November.
Save 15% off driveshaft parts with Promo Code: 15AMI2024

{"id":6423409000599,"title":"PTI 3503-326 Trans Slip Yoke","handle":"3503-326","description":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke \u003c\/h2\u003e\n\u003cp\u003eNot a suitable barrel length for transfer cases.  Important:  If converting your old bolt on style end yoke for truck type Turbo 400 transmissions, this slip yoke will not fit properly without counterboring (removing) some of the splines inside the yoke.  If your output shaft used an end yoke and has a threaded hole at the end then you will need the splines counterbored see below for alternate slip yoke options. \u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eVehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp; Transfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E  and confirm dimensions for transfer cases fitment.  \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside Snap Ring\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.188 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.625 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C)\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Spline)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e5.500 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.886 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.378 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32\u003cbr\u003e \u003cem\u003e(31 with blind spot - see note below*)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nGM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\" alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eIf you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Transmission Slip yoke with and without counter bore\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003ePTI Transmission Slip Yoke\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003cp\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at12.47.42PM_480x480.png?v=1685119728\" alt=\"Driveshaft Slip Yoke Diagram Spline Count\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at12.47.42PM_480x480.png?v=1685119728\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\n\u003cp\u003e\u003cstrong\u003eAlternate Part Options: \u003cbr\u003e\u003c\/strong\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-2431x?variant=5137867866149\" title=\"Neapco N3-3-2431X Trans Slip Yoke\"\u003eN3-3-2431X\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSpicer \u003ca title=\"Spicer 3-3-2431X Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-2431x?variant=33096307909\"\u003e3-3-2431X\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSonnax \u003ca title=\"Sonnax T3-3-2431CBHP Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-2431cbhp?variant=41365758469\"\u003eT3-3-2431CBHP\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSonnax \u003ca title=\"Sonnax T3-3-2431CBH Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-2431cbh?variant=31295160352903\"\u003eT3-3-2431CBH\u003c\/a\u003e Slip Yoke with counter bore for roller bearing tail housings\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eThis part is compatible with:\u003cbr\u003e\u003c\/strong\u003eSpicer\u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-1350x?variant=29572658629\" title=\"Spicer 5-1350X U-Joint\"\u003e 5-1350X\u003c\/a\u003e U-joint\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003cbr\u003e \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\" data-mce-href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e CHAT\u003c\/a\u003e | (574) 287-9650\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2021-02-05T10:50:28-05:00","created_at":"2021-02-05T10:50:28-05:00","vendor":"PTI","type":"Slip Yoke","tags":["332431X","4L80","4L80-E","4L80E","4L85","6L80-E","6L80E","Application_Transmission Applications: Fits various 32 spline transmission. Fits Transmission Applications:","Barrel OD_1.89\"","Bearing Cap Diameter_1.188\"","Brand_PTI","Doug Nash","Jericho","Length_5.50\"","Lock Up_3.625\"","M-20","M20","M21","M22","Part_Transmission Slip Yoke","Part_Yoke","Richmond","Series_1350","Spline Diameter_1.38\"","Spline_32","Super T-10","Super T10","T-10","T10","TH-400","Transmission Make_GM","Transmission Model_4L80E","Transmission Model_4L85E","Transmission Model_Doug Nash","Transmission Model_Jericho","Transmission Model_M20","Transmission Model_M21","Transmission Model_M22","Transmission Model_Richmond","Transmission Model_Super T-10","Transmission Model_T-10","Transmission Model_TH-400","Transmission Model_Turbo 400","Transmission Slip Assembly","Turbo 400","U-Joint Type_Outside Snap Ring","Vehicle_GM","Yoke_Transmission Slip Yoke"],"price":12662,"price_min":12662,"price_max":12662,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":39038735483031,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3503-326","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"PTI 3503-326 Trans Slip Yoke","public_title":null,"options":["Default Title"],"price":12662,"weight":1470,"compare_at_price":null,"inventory_quantity":-2,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607333.6421.-PTIWM.jpg?v=1612540282","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607336.3595.-PTIWM.jpg?v=1612540283","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607343.7736.-PTIWM.jpg?v=1612540282","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607340.72.-PTIWM.jpg?v=1612540283"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607333.6421.-PTIWM.jpg?v=1612540282","options":["Title"],"media":[{"alt":null,"id":19432700543127,"position":1,"preview_image":{"aspect_ratio":0.618,"height":500,"width":309,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607333.6421.-PTIWM.jpg?v=1612540282"},"aspect_ratio":0.618,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607333.6421.-PTIWM.jpg?v=1612540282","width":309},{"alt":null,"id":19432700575895,"position":2,"preview_image":{"aspect_ratio":0.652,"height":500,"width":326,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607336.3595.-PTIWM.jpg?v=1612540283"},"aspect_ratio":0.652,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607336.3595.-PTIWM.jpg?v=1612540283","width":326},{"alt":null,"id":19432700608663,"position":3,"preview_image":{"aspect_ratio":1.502,"height":333,"width":500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607343.7736.-PTIWM.jpg?v=1612540282"},"aspect_ratio":1.502,"height":333,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607343.7736.-PTIWM.jpg?v=1612540282","width":500},{"alt":null,"id":19432700641431,"position":4,"preview_image":{"aspect_ratio":0.606,"height":500,"width":303,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607340.72.-PTIWM.jpg?v=1612540283"},"aspect_ratio":0.606,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3503-326.1423607340.72.-PTIWM.jpg?v=1612540283","width":303}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003ePTI Drive Shaft Transmission Slip Yoke \u003c\/h2\u003e\n\u003cp\u003eNot a suitable barrel length for transfer cases.  Important:  If converting your old bolt on style end yoke for truck type Turbo 400 transmissions, this slip yoke will not fit properly without counterboring (removing) some of the splines inside the yoke.  If your output shaft used an end yoke and has a threaded hole at the end then you will need the splines counterbored see below for alternate slip yoke options. \u003c\/p\u003e\n\u003c!-- ↓ TAB Section ↓ --\u003e\n\u003cul class=\"shopify-tabs\"\u003e\n\u003cli data-tab=\"tab-1\" class=\"current\"\u003eDescription\u003c\/li\u003e\n\u003cli data-tab=\"tab-2\"\u003eProduct Specs\u003c\/li\u003e\n\u003cli data-tab=\"tab-3\"\u003eVehicle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"shopify-tab-content current\" id=\"tab-1\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission \u0026amp; Transfer Case Applications: \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eFits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E  and confirm dimensions for transfer cases fitment.  \u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSeries\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStyle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOutside Snap Ring\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Cap Diameter (A)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.188 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eU-Joint Width (B)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.625 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eSlip Yoke Length (C)\u003c\/strong\u003e\u003cbr\u003e\u003cem\u003e(Center Line to End of Spline)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e5.500 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBarrel Diameter (D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.886 Inch\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Diameter (E)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.378 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Spline (F)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32\u003cbr\u003e \u003cem\u003e(31 with blind spot - see note below*)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSpline Counter Bore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVehicle Make\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\nGM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002038\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at3.07.11PM_480x480.png?v=1685128181\" alt=\"Driveshaft Slip Yoke Diagram Outside Snap Ring Style\"\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTransmission Output Shaft Style\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eIf you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Transmission Slip yoke with and without counter bore\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Transmission_Slip_yoke_counterbore_480x480.png?v=1613663588\"\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-2\"\u003ePTI Transmission Slip Yoke\u003c\/div\u003e\n\u003cdiv class=\"shopify-tab-content\" id=\"tab-3\"\u003e\n\u003cp\u003eSome slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Slip_Yoke_Side_Diagram_480x480.png?v=1599676229\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at12.47.42PM_480x480.png?v=1685119728\" alt=\"Driveshaft Slip Yoke Diagram Spline Count\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/ScreenShot2023-05-26at12.47.42PM_480x480.png?v=1685119728\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c!-- ↑ TAB Section ↑ --\u003e\n\n\u003cp\u003e\u003cstrong\u003eAlternate Part Options: \u003cbr\u003e\u003c\/strong\u003eNeapco \u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/n3-3-2431x?variant=5137867866149\" title=\"Neapco N3-3-2431X Trans Slip Yoke\"\u003eN3-3-2431X\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSpicer \u003ca title=\"Spicer 3-3-2431X Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/3-3-2431x?variant=33096307909\"\u003e3-3-2431X\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSonnax \u003ca title=\"Sonnax T3-3-2431CBHP Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-2431cbhp?variant=41365758469\"\u003eT3-3-2431CBHP\u003c\/a\u003e Slip Yoke with counter bore\u003cbr\u003eSonnax \u003ca title=\"Sonnax T3-3-2431CBH Trans Slip Yoke\" href=\"https:\/\/www.actionmachineinc.com\/products\/t3-3-2431cbh?variant=31295160352903\"\u003eT3-3-2431CBH\u003c\/a\u003e Slip Yoke with counter bore for roller bearing tail housings\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eThis part is compatible with:\u003cbr\u003e\u003c\/strong\u003eSpicer\u003ca href=\"https:\/\/www.actionmachineinc.com\/products\/5-1350x?variant=29572658629\" title=\"Spicer 5-1350X U-Joint\"\u003e 5-1350X\u003c\/a\u003e U-joint\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have any questions we are here to help: \u003cbr\u003e \u003ca href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" title=\"Contact Information for Action Machine Inc.\" data-mce-href=\"https:\/\/www.actionmachineinc.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e | \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\" data-mce-href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003e CHAT\u003c\/a\u003e | (574) 287-9650\u003c\/strong\u003e\u003c\/p\u003e"}

PTI 3503-326 Trans Slip Yoke

Vendor: PTI, Sku: 3503-326

Product Description

PTI Drive Shaft Transmission Slip Yoke 

Not a suitable barrel length for transfer cases.  Important:  If converting your old bolt on style end yoke for truck type Turbo 400 transmissions, this slip yoke will not fit properly without counterboring (removing) some of the splines inside the yoke.  If your output shaft used an end yoke and has a threaded hole at the end then you will need the splines counterbored see below for alternate slip yoke options. 

  • Description
  • Product Specs
  • Vehicle
Transmission & Transfer Case Applications: 

Fits the GM transmissions with 32 spline output shaft Turbo 400, TH-400, Super T-10, Richmond, M22, M21, M20, Jericho, 4L85E, 4L80E  and confirm dimensions for transfer cases fitment.  

 

Series 1350
Style Outside Snap Ring
U-Joint Cap Diameter (A) 1.188 Inch
U-Joint Width (B) 3.625 Inch
Slip Yoke Length (C)
(Center Line to End of Spline)
5.500 Inch
Barrel Diameter (D) 1.886 Inch
Spline Diameter (E) 1.378 Inch
Number of Spline (F) 32
(31 with blind spot - see note below*)
Spline Counter Bore No
Material Steel
Vehicle Make GM

VMRS: 024002038

 * The transmission slip yoke may have one or two missing splines inside the barrel known as blind spots. Each blind spot counts as one spline in the total spline count. The blind spots do not affect the fit of the yoke on your output shaft.

Driveshaft Slip Yoke Diagram Outside Snap Ring Style

Transmission Output Shaft Style

If you have a TH-400 or 4L80 confirm if you have an o-ring on the output spline of your transmission. If your transmission has an o-ring you will need a 5.5” short barrel counter bored slip yoke.

Transmission Slip yoke with and without counter bore

PTI Transmission Slip Yoke

Some slip yokes have missing splines. To verify spline count, always count the splines on the transmission output shaft. A slip yoke counterbore is a short lead without spline in the end of the yoke.

Driveshaft Slip Yoke Diagram Spline Count

Alternate Part Options: 
Neapco N3-3-2431X Slip Yoke with counter bore
Spicer 3-3-2431X Slip Yoke with counter bore
Sonnax T3-3-2431CBHP Slip Yoke with counter bore
Sonnax T3-3-2431CBH Slip Yoke with counter bore for roller bearing tail housings

This part is compatible with:
Spicer 5-1350X U-joint

If you have any questions we are here to help: 
CONTACT US |  CHAT | (574) 287-9650

$126.62
Maximum quantity available reached.
.