Custom One Piece Driveshaft
|
MEASURING GUIDE:
U-joint to U-joint or U-Joint to Flange
DRIVESHAFT LENGTH: Measure from the flat of the flange on the trans. output to the face of the flange or center of the u-joint on the end yoke on the differential input.
.
..
Slip and Spline Driveshafts
Custom One Piece Driveshaft - 3.0" OD, Steel, 1410 Series
Custom Driveshaft | 3S1410-Slip
- Material: Steel
- Max Length: 56" CL-CL
- Tube Diameter: 3.0" OD
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Material: Steel
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Tube Diameter: 3.0" OD
- Max Length: 56" CL-CL
Custom One Piece Driveshaft - 3.5" OD, Steel, 1410 Series
Custom Driveshaft | 3.5S1410-Slip
- Material: Steel
- Max Length: 61" CL-CL
- Tube Diameter: 3.5" OD
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Material: Steel
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Tube Diameter: 3.5" OD
- Max Length: 61" CL-CL
Custom One Piece Driveshaft - 4.0" OD, Aluminum, 1410 Series
Custom Driveshaft | 4A1410-SLIP
- Material: Aluminum
- Max Length: 68" CL-CL
- Tube Diameter: 4.0" OD
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Material: Aluminum
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Tube Diameter: 4.0" OD
- Max Length: 68" CL-CL
Custom One Piece Driveshaft - 4.0" OD, Steel, 1410 Series
Custom Driveshaft | 4S1410-Slip
- Material: Steel
- Max Length: 68" CL-CL
- Tube Diameter: 4.0" OD
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Material: Steel
- Series: 1410
- U-Joint: 1 3/16" Cap x 4 3/16" Span
- Tube Diameter: 4.0" OD
- Max Length: 68" CL-CL
