Rockford 430-10 U-Joint "Staked In"

{"id":3751119290420,"title":"Rockford 430-12 U-Joint \"Staked In\"","handle":"430-12","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-12\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.972 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.641 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 2 Staked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1990, 1991, 1992, 1993, 1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eNissan,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 3\u003cspan\u003e \u003c\/span\u003eStaked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eNissan, \u003cem\u003ePickup 4x4 \u003c\/em\u003e \u003cem\u003e(Rear)\u003cbr\u003e   - Rear Shaft with 3 U-Joints - Middle Joint with Staked-In U-Joint\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan, \u003cem\u003e300ZX (Exc. Twin Turbo)\u003cbr\u003e   - With Staked-In U-Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003eNissan, \u003c\/span\u003e\u003cem\u003e300ZX (Twin Turbo)\u003cbr\u003e   - With Staked-In Type Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1987, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePathfinder 4x4 (Rear)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - Rear Shaft - Middle Joint with Staked-In U-Joint\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCressida\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - With Staked-In Type Joints\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1989, 1990, \u003cspan\u003e1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-12T10:07:36-04:00","created_at":"2019-07-12T10:07:36-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43012","Brand_Rockford","Cap Size_0.972\"","CapSizeBullet_0.972\"","Grease_Greasable","LockUpBullet_1.641\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.641\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Nissan","Vehicle_Toyota"],"price":2891,"price_min":2891,"price_max":2891,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28973265584180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-12","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-12 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":2891,"weight":748,"compare_at_price":null,"inventory_quantity":-479,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","options":["Title"],"media":[{"alt":null,"id":3027607584903,"position":1,"preview_image":{"aspect_ratio":1.001,"height":1499,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175"},"aspect_ratio":1.001,"height":1499,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.34.jpg?v=1562941175","width":1500},{"alt":null,"id":3027607683207,"position":2,"preview_image":{"aspect_ratio":1.258,"height":1192,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179"},"aspect_ratio":1.258,"height":1192,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-12.U-Joint.jpg?v=1562941179","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-12\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\n\u003cdiv data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.972 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.641 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection\u003e\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 2 Staked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1990, 1991, 1992, 1993, 1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eNissan,\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePickup 2WD 4 cyl. \u003cmeta charset=\"utf-8\"\u003e(Rear)\u003cbr\u003e   - with 3\u003cspan\u003e \u003c\/span\u003eStaked-In Joint Shaft\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eNissan, \u003cem\u003ePickup 4x4 \u003c\/em\u003e \u003cem\u003e(Rear)\u003cbr\u003e   - Rear Shaft with 3 U-Joints - Middle Joint with Staked-In U-Joint\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan, \u003cem\u003e300ZX (Exc. Twin Turbo)\u003cbr\u003e   - With Staked-In U-Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan\u003eNissan, \u003c\/span\u003e\u003cem\u003e300ZX (Twin Turbo)\u003cbr\u003e   - With Staked-In Type Joints\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1987, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003ePathfinder 4x4 (Rear)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - Rear Shaft - Middle Joint with Staked-In U-Joint\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1990, 1991, 1992, 1993, 1994, 1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCressida\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e   - With Staked-In Type Joints\u003cbr\u003e\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1989, 1990, \u003cspan\u003e1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3739323990068,"title":"Rockford 430-8 U-Joint \"Staked In\"","handle":"430-8","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-8\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable data-mce-fragment=\"1\" class=\"table\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eOEM Series:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eManufacturer:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eGreasable:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eSnap Ring Type:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eBearing Cap Diameter:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003e0.823 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eLock Up:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003e1.285 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content3\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003eLexus, \u003cem\u003eNX 200T\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e2015, 2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eRav 4\u003c\/em\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBuick, \u003cem\u003e\u003cem\u003eEnclave (\u003c\/em\u003e\u003c\/em\u003e\u003cem\u003eRear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eEquinox\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox 3.4L (Exc. 3.6L)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eTraverse (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC,\u003cem\u003e Acadia (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC, \u003cem\u003eTerrian (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eJaguar, \u003cem\u003eXJ6-3 Bolt Flng\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eLexus, \u003cem\u003eRX300\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1999, 2000, 2001, 2002, 2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nLexus, \u003cem\u003eRX330\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nLexus, \u003cem\u003eRX350\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e200SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e240SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1989, 190, 1991, 1992, 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e810\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1977, \u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMaxima\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1977, \u003c\/span\u003e\u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMurano\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2006, 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003ePickup S21\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003ePontiac, \u003cem\u003eTorrent\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePontiac, \u003cem\u003eTorrent 3.4L (exc 3.6L)\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSaturn, \u003cem\u003eOutlook (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eBaja\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eForester\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2009, 2010, 2011, 2012, 2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eHatchback\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, 1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nSubaru, \u003ci\u003eImpreza\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011, 2012, 2013, 2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy Outback\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, \u003cspan\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLoyale\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, \u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eOutback Wagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1996, 1997, \u003c\/span\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eSedan\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eSVX\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1992, 1993, 1994, 1995, 1996\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eTribeca\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e2006, 2007, 2008, 2009, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2010, 2011, 2012, 2013, 20\u003c\/span\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eWagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eXT\/XT6\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989, 1990, 19\u003c\/span\u003e91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCamry All-Trac\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCaleca\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1981\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCorolla\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1981\u003c\/span\u003e\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e\u003cspan\u003e85\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cspan\u003eToyota, \u003cem\u003eCorolla All-Trac\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, \u003cspan\u003e1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91, 19\u003c\/span\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCressida\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, \u003cspan\u003e1986, 1987, 1988,\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eHighlander (exc. Hybrid)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003ePrevia\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1991, \u003cspan\u003e1992, 1993, 1994, 1995, 19\u003c\/span\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eSienna AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, \u003cspan\u003e2005, 2006, 2007, 2008, 2009, 20\u003c\/span\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eRav 4\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, 1998, 1999, \u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-03T14:47:18-04:00","created_at":"2019-07-03T14:47:18-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["4308","Brand_Rockford","Cap Size_0.823\"","CapSizeBullet_0.823\"","Grease_Greasable","LockUpBullet_1.285\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.285\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Lexus","Vehicle_Toyota"],"price":5062,"price_min":5062,"price_max":5062,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28896783695924,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-8","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Rockford 430-8 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":5062,"weight":499,"compare_at_price":null,"inventory_quantity":0,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.34.jpg?v=1562784881","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.jpg?v=1562784885"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.34.jpg?v=1562784881","options":["Title"],"media":[{"alt":null,"id":3021930037383,"position":1,"preview_image":{"aspect_ratio":1.202,"height":1248,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.34.jpg?v=1562784881"},"aspect_ratio":1.202,"height":1248,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.34.jpg?v=1562784881","width":1500},{"alt":null,"id":3021930201223,"position":2,"preview_image":{"aspect_ratio":1.294,"height":1159,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.jpg?v=1562784885"},"aspect_ratio":1.294,"height":1159,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-8.Ujoint.jpg?v=1562784885","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-8\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable data-mce-fragment=\"1\" class=\"table\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eOEM Series:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eManufacturer:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eGreasable:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eSnap Ring Type:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eBearing Cap Diameter:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003e0.823 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\" class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003eLock Up:\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"ng-binding\"\u003e1.285 \u003cmeta charset=\"utf-8\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eInch\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003csection\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003csection id=\"content3\"\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003eLexus, \u003cem\u003eNX 200T\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e2015, 2016\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 28.9803%;\"\u003eToyota,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eRav 4\u003c\/em\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 68.5152%;\"\u003e2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBuick, \u003cem\u003e\u003cem\u003eEnclave (\u003c\/em\u003e\u003c\/em\u003e\u003cem\u003eRear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eEquinox\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox 3.4L (Exc. 3.6L)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eTraverse (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC,\u003cem\u003e Acadia (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC, \u003cem\u003eTerrian (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eJaguar, \u003cem\u003eXJ6-3 Bolt Flng\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eLexus, \u003cem\u003eRX300\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1999, 2000, 2001, 2002, 2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nLexus, \u003cem\u003eRX330\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nLexus, \u003cem\u003eRX350\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e200SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e240SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1989, 190, 1991, 1992, 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e810\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1977, \u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMaxima\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1977, \u003c\/span\u003e\u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMurano\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2006, 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003ePickup S21\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003ePontiac, \u003cem\u003eTorrent\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003ePontiac, \u003cem\u003eTorrent 3.4L (exc 3.6L)\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSaturn, \u003cem\u003eOutlook (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eBaja\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eForester\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2009, 2010, 2011, 2012, 2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eHatchback\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, 1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nSubaru, \u003ci\u003eImpreza\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011, 2012, 2013, 2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy Outback\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, \u003cspan\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLoyale\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, \u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eOutback Wagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1996, 1997, \u003c\/span\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eSedan\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eSVX\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1992, 1993, 1994, 1995, 1996\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eTribeca\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e2006, 2007, 2008, 2009, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2010, 2011, 2012, 2013, 20\u003c\/span\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eWagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eXT\/XT6\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989, 1990, 19\u003c\/span\u003e91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCamry All-Trac\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCaleca\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1981\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCorolla\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1981\u003c\/span\u003e\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e\u003cspan\u003e85\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cspan\u003eToyota, \u003cem\u003eCorolla All-Trac\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, \u003cspan\u003e1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91, 19\u003c\/span\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCressida\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, \u003cspan\u003e1986, 1987, 1988,\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eHighlander (exc. Hybrid)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003ePrevia\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1991, \u003cspan\u003e1992, 1993, 1994, 1995, 19\u003c\/span\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eSienna AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, \u003cspan\u003e2005, 2006, 2007, 2008, 2009, 20\u003c\/span\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eRav 4\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, 1998, 1999, \u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3751083180084,"title":"Rockford 430-11 U-Joint \"Staked In\"","handle":"430-11","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-11\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-12T09:15:02-04:00","created_at":"2019-07-12T09:15:02-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43011","Brand_Rockford","Cap Size_0.947\"","CapSizeBullet_0.947\"","Grease_Greasable","LockUpBullet_1.900\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.900\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_BMW","Vehicle_Diahatsu","Vehicle_Mazda"],"price":2891,"price_min":2891,"price_max":2891,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28972597116980,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-11","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-11 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":2891,"weight":454,"compare_at_price":null,"inventory_quantity":-160,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","options":["Title"],"media":[{"alt":null,"id":3027391414407,"position":1,"preview_image":{"aspect_ratio":0.989,"height":1517,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590"},"aspect_ratio":0.989,"height":1517,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.34.jpg?v=1562937590","width":1500},{"alt":null,"id":3027391479943,"position":2,"preview_image":{"aspect_ratio":1.148,"height":1307,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594"},"aspect_ratio":1.148,"height":1307,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-11.U-Joint.jpg?v=1562937594","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-11\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3750282133556,"title":"Rockford 430-10A U-Joint \"Staked In\"","handle":"430-10a","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-10A\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput id=\"tab4\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eManufacturer:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreasable:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eSnap Ring Type:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eManufacturer Part Number:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e430-10A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBearing Cap Diameter:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e0.867 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eLock Up:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e1.515 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMiata\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eRX-7 (Exc. 87-91 Turbo)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eScorpio\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cspan\u003e2006, 2007, 2008\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" alt=\"Disassembly\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" alt=\"Reassembly\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" alt=\"Snap Ring Install\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Install Snap Ring into Bearing Cup Groove\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Rotate Snap Ring 180 degrees\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-11T13:39:36-04:00","created_at":"2019-07-11T13:39:36-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43010A","Brand_Rockford","Cap Size_0.867\"","CapSizeBullet_0.867\"","Grease_Greasable","LockUpBullet_1.515\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.515\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Mazda","Vehicle_Subaru"],"price":2724,"price_min":2724,"price_max":2724,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28967718977588,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-10A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-10A U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":2724,"weight":748,"compare_at_price":null,"inventory_quantity":-149,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.34.jpg?v=1562867409","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.jpg?v=1562867411"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.34.jpg?v=1562867409","options":["Title"],"media":[{"alt":null,"id":3024188833927,"position":1,"preview_image":{"aspect_ratio":1.034,"height":1450,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.34.jpg?v=1562867409"},"aspect_ratio":1.034,"height":1450,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.34.jpg?v=1562867409","width":1500},{"alt":null,"id":3024188899463,"position":2,"preview_image":{"aspect_ratio":1.254,"height":1196,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.jpg?v=1562867411"},"aspect_ratio":1.254,"height":1196,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10A.U-Joint.jpg?v=1562867411","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-10A\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput id=\"tab4\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eOEM Series:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eManufacturer:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eGreasable:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eSnap Ring Type:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eManufacturer Part Number:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e430-10A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eBearing Cap Diameter:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e0.867 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003eLock Up:\u003c\/td\u003e\n\u003ctd class=\"ng-binding\"\u003e1.515 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMiata\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eRX-7 (Exc. 87-91 Turbo)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eScorpio\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cspan\u003e2006, 2007, 2008\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" alt=\"Disassembly\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" alt=\"Reassembly\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" alt=\"Snap Ring Install\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Install Snap Ring into Bearing Cup Groove\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Rotate Snap Ring 180 degrees\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3751070269492,"title":"Rockford 430-10D U-Joint \"Staked In\"","handle":"430-10d","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-10D\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.867 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.575 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Inside Lockup:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1.715 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eSuzuki, \u003cem\u003eSX4 AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-12T09:01:38-04:00","created_at":"2019-07-12T09:01:38-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["43010D","Brand_Rockford","Cap Size_0.867\"","CapSizeBullet_0.867\"","Grease_Greasable","LockUpBullet_1.575\" X 1.715\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.575\"","Snap Ring to Snap Ring_1.715\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Suzuki"],"price":6813,"price_min":6813,"price_max":6813,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28972491407412,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-10D","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-10D U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":6813,"weight":748,"compare_at_price":null,"inventory_quantity":-87,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.34.jpg?v=1562936793","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.jpg?v=1562936797","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.box.jpg?v=1562936802"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.34.jpg?v=1562936793","options":["Title"],"media":[{"alt":null,"id":3027339640967,"position":1,"preview_image":{"aspect_ratio":1.027,"height":1461,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.34.jpg?v=1562936793"},"aspect_ratio":1.027,"height":1461,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.34.jpg?v=1562936793","width":1500},{"alt":null,"id":3027339673735,"position":2,"preview_image":{"aspect_ratio":1.355,"height":1107,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.jpg?v=1562936797"},"aspect_ratio":1.355,"height":1107,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.U-Joint.jpg?v=1562936797","width":1500},{"alt":null,"id":3027339804807,"position":3,"preview_image":{"aspect_ratio":1.277,"height":1175,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.box.jpg?v=1562936802"},"aspect_ratio":1.277,"height":1175,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-10D.box.jpg?v=1562936802","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-10D\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.867 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.575 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Inside Lockup:\u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e1.715 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eSuzuki, \u003cem\u003eSX4 AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3749246566452,"title":"Rockford 430-9B U-Joint \"Staked In\"","handle":"430-9b","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-9B\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.791 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.335 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eHonda, \u003cem\u003eCRV\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1997, 1998, 1998, 1999, 200, 2001\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-10T15:16:50-04:00","created_at":"2019-07-10T15:16:50-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["4309B","Brand_Rockford","Cap Size_0.791\"","CapSizeBullet_0.791\"","Grease_Greasable","LockUpBullet_1.335\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.315\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Honda"],"price":3736,"price_min":3736,"price_max":3736,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28961562165300,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-9B","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-9B U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":3736,"weight":748,"compare_at_price":null,"inventory_quantity":-85,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.34.jpg?v=1562786322","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.jpg?v=1562786327"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.34.jpg?v=1562786322","options":["Title"],"media":[{"alt":null,"id":3021955596423,"position":1,"preview_image":{"aspect_ratio":1.178,"height":1500,"width":1767,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.34.jpg?v=1562786322"},"aspect_ratio":1.178,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.34.jpg?v=1562786322","width":1767},{"alt":null,"id":3021955694727,"position":2,"preview_image":{"aspect_ratio":1.403,"height":1069,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.jpg?v=1562786327"},"aspect_ratio":1.403,"height":1069,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9B.UJoint.jpg?v=1562786327","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-9B\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.791 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.335 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eHonda, \u003cem\u003eCRV\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e1997, 1998, 1998, 1999, 200, 2001\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":3749233950772,"title":"Rockford 430-9A U-Joint \"Staked In\"","handle":"430-9a","description":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-9A\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e \u003cinput id=\"tab4\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.791 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.315 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eHonda, \u003cem\u003eCRV\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2002, 2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" alt=\"Disassembly\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" alt=\"Reassembly\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" alt=\"Snap Ring Install\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2019-07-10T15:05:47-04:00","created_at":"2019-07-10T15:05:47-04:00","vendor":"Rockford","type":"Universal Joint Kit","tags":["4309A","Brand_Rockford","Cap Size_0.791\"","CapSizeBullet_0.791\"","Grease_Greasable","LockUpBullet_1.315\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.315\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Honda"],"price":3758,"price_min":3758,"price_max":3758,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":28961460650036,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"430-9A","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Rockford 430-9A U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":3758,"weight":748,"compare_at_price":null,"inventory_quantity":-67,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.34.jpg?v=1562785608","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.jpg?v=1562785612","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.Box.jpg?v=1562785619"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.34.jpg?v=1562785608","options":["Title"],"media":[{"alt":null,"id":3021941506183,"position":1,"preview_image":{"aspect_ratio":1.066,"height":1407,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.34.jpg?v=1562785608"},"aspect_ratio":1.066,"height":1407,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.34.jpg?v=1562785608","width":1500},{"alt":null,"id":3021941538951,"position":2,"preview_image":{"aspect_ratio":1.277,"height":1500,"width":1916,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.jpg?v=1562785612"},"aspect_ratio":1.277,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.UJoint.jpg?v=1562785612","width":1916},{"alt":null,"id":3021941571719,"position":3,"preview_image":{"aspect_ratio":1.261,"height":1190,"width":1500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.Box.jpg?v=1562785619"},"aspect_ratio":1.261,"height":1190,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/430-9A.Box.jpg?v=1562785619","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eRockford Drive Shaft Universal Joint 430-9A\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput id=\"tab1\" type=\"radio\" name=\"tabs\" checked\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput id=\"tab2\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput id=\"tab3\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e \u003cinput id=\"tab4\" type=\"radio\" name=\"tabs\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ctable class=\"table\" data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eOEM Series:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eStaked-In Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eRockford\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eGreasable:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eSnap Ring Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eManufacturer Part Number:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e430-9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e0.791 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-ng-repeat=\"(key,val) in part.partData.attrs\" class=\"ng-scope\" data-mce-fragment=\"1\"\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e\u003cstrong\u003eLock Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"ng-binding\" data-mce-fragment=\"1\"\u003e1.315 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eHonda, \u003cem\u003eCRV\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2002, 2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" alt=\"Disassembly\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" alt=\"Reassembly\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" alt=\"Snap Ring Install\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":7241580544151,"title":"Neapco 1-0430 U-Joint \"Staked In\"","handle":"1-0430","description":"\u003ch2\u003eNeapco Drive Shaft Universal Joint 1-0430\u003cbr\u003e- Specialty “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.859 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.406 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable - Fitting in Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBuick, \u003cem\u003e\u003cem\u003eEnclave (\u003c\/em\u003e\u003c\/em\u003e\u003cem\u003eRear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eEquinox\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox 3.4L (Exc. 3.6L)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eTraverse (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC,\u003cem\u003e Acadia (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC, \u003cem\u003eTerrian (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eJaguar, \u003cem\u003eXJ6-3 Bolt Flng\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eLexus, \u003cem\u003eRX300\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1999, 2000, 2001, 2002, 2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nLexus, \u003cem\u003eRX330\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nLexus, \u003cem\u003eRX350\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e200SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e240SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1989, 190, 1991, 1992, 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e810\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1977, \u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMaxima\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1977, \u003c\/span\u003e\u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMurano\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2006, 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003ePickup S21\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003ePontiac, \u003cem\u003eTorrent\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePontiac, \u003cem\u003eTorrent 3.4L (exc 3.6L)\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSaturn, \u003cem\u003eOutlook (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eBaja\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eForester\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2009, 2010, 2011, 2012, 2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eHatchback\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, 1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nSubaru, \u003ci\u003eImpreza\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011, 2012, 2013, 2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy Outback\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, \u003cspan\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLoyale\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, \u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eOutback Wagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1996, 1997, \u003c\/span\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eSedan\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eSVX\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1992, 1993, 1994, 1995, 1996\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eTribeca\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e2006, 2007, 2008, 2009, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2010, 2011, 2012, 2013, 20\u003c\/span\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eWagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eXT\/XT6\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989, 1990, 19\u003c\/span\u003e91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCamry All-Trac\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCaleca\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1981\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCorolla\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1981\u003c\/span\u003e\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e\u003cspan\u003e85\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cspan\u003eToyota, \u003cem\u003eCorolla All-Trac\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, \u003cspan\u003e1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91, 19\u003c\/span\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCressida\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, \u003cspan\u003e1986, 1987, 1988,\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eHighlander (exc. Hybrid)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003ePrevia\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1991, \u003cspan\u003e1992, 1993, 1994, 1995, 19\u003c\/span\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eSienna AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, \u003cspan\u003e2005, 2006, 2007, 2008, 2009, 20\u003c\/span\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eRav 4\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, 1998, 1999, \u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cbr\u003e","published_at":"2021-10-27T09:24:37-04:00","created_at":"2021-10-27T09:24:37-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["43010","Brand_Neapco","Cap Size_0.859\"","CapSizeBullet_0.859\"","Grease_Greasable","LockUpBullet_1.406\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.406\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_Buick","Vehicle_Chevy","Vehicle_GMC","Vehicle_Jaguar","Vehicle_Lexus","Vehicle_Nissan","Vehicle_Pontiac","Vehicle_Saturn","Vehicle_Subaru","Vehicle_Toyota"],"price":3016,"price_min":3016,"price_max":3016,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":41272176672919,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"1-0430","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Neapco 1-0430 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":3016,"weight":748,"compare_at_price":null,"inventory_quantity":-12,"inventory_management":"shopify","inventory_policy":"deny","barcode":"083869104300","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/apijevot7__42772.1634793399.jpg?v=1677255786"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/apijevot7__42772.1634793399.jpg?v=1677255786","options":["Title"],"media":[{"alt":null,"id":25235426705559,"position":1,"preview_image":{"aspect_ratio":1.0,"height":500,"width":500,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/apijevot7__42772.1634793399.jpg?v=1677255786"},"aspect_ratio":1.0,"height":500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/apijevot7__42772.1634793399.jpg?v=1677255786","width":500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eNeapco Drive Shaft Universal Joint 1-0430\u003cbr\u003e- Specialty “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e \u003c!-- ***** 1 ***** --\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 2 ***** --\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e0.859 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.406 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable - Fitting in Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 3 ***** --\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eBuick, \u003cem\u003e\u003cem\u003eEnclave (\u003c\/em\u003e\u003c\/em\u003e\u003cem\u003eRear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eEquinox\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox 3.4L (Exc. 3.6L)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nChevy, \u003cem\u003eEquinox (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eChevy, \u003cem\u003eTraverse (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC,\u003cem\u003e Acadia (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eGMC, \u003cem\u003eTerrian (Middle Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2010, 2011\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eJaguar, \u003cem\u003eXJ6-3 Bolt Flng\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eLexus, \u003cem\u003eRX300\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1999, 2000, 2001, 2002, 2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nLexus, \u003cem\u003eRX330\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nLexus, \u003cem\u003eRX350\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e200SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1978, 1979, 1980, 1981, 1982, 1983, 1984\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e240SX\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1989, 190, 1991, 1992, 1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003e810\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1977, \u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMaxima\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1977, \u003c\/span\u003e\u003cspan\u003e1978, 1979, 1980\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003eMurano\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2006, 2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eNissan, \u003cem\u003ePickup S21\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003ePontiac, \u003cem\u003eTorrent\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003ePontiac, \u003cem\u003eTorrent 3.4L (exc 3.6L)\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSaturn, \u003cem\u003eOutlook (Rear Yoke)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2007, 2008, 2009, 2010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eBaja\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2003, 2004, 2005, 2006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eForester\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2009, 2010, 2011, 2012, 2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eHatchback\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, 1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\nSubaru, \u003ci\u003eImpreza\u003c\/i\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2008, 2009, 2010, 2011, 2012, 2013, 2014\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLegacy Outback\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, \u003cspan\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eLoyale\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1990, \u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eOutback Wagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1996, 1997, \u003c\/span\u003e\u003cspan\u003e1998, 1999, \u003c\/span\u003e\u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eSubaru, \u003cem\u003eSedan\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru,\u003c\/span\u003e\u003cspan\u003e \u003cem\u003eSVX\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1992, 1993, 1994, 1995, 1996\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eTribeca\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e2006, 2007, 2008, 2009, \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e2010, 2011, 2012, 2013, 20\u003c\/span\u003e14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eWagon\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eSubaru, \u003cem\u003eXT\/XT6\u003c\/em\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1985, 1986, 1987, 1988, 1989, 1990, 19\u003c\/span\u003e91\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCamry All-Trac\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCaleca\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1981\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e85\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCorolla\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1981\u003c\/span\u003e\u003cspan\u003e, 1982, 1983, 1984, 19\u003c\/span\u003e\u003cspan\u003e85\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003e\u003cspan\u003eToyota, \u003cem\u003eCorolla All-Trac\u003c\/em\u003e\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1988, \u003cspan\u003e1989, 1990, 19\u003c\/span\u003e\u003cspan\u003e91, 19\u003c\/span\u003e92\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eCressida\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1985, \u003cspan\u003e1986, 1987, 1988,\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eHighlander (exc. Hybrid)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e2001, 2002, 2003, 2004, 2005, 2006, 2007\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003ePrevia\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1991, \u003cspan\u003e1992, 1993, 1994, 1995, 19\u003c\/span\u003e96\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eSienna AWD\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e2004, \u003cspan\u003e2005, 2006, 2007, 2008, 2009, 20\u003c\/span\u003e10\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\"\u003eToyota, \u003cem\u003eRav 4\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\"\u003e1996, 1997, 1998, 1999, \u003cspan\u003e2000, 2001, 2002, 2003, 2004, 2005\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003c!-- ***** 4 ***** --\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e\n\u003chr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cbr\u003e"}

{"id":7006929191063,"title":"Spicer 5-3201X U-Joint \"Staked In\"","handle":"5-3201x","description":"\u003ch2\u003eSpicer Driveshaft Universal Joint \u003cmeta charset=\"utf-8\"\u003e \u003cb class=\"ng-binding ng-scope\" ng-if=\"part.partTypeValue != 'SUBMODEL'\" data-mce-fragment=\"1\"\u003e5-3201X\u003c\/b\u003e\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eT\u003c\/span\u003ehis part is drop shipped from the manufacturer and will ship at the earliest available time. Average time to ship is 1-3 business days from when you place the order. You can contact Action Machine Inc. to confirm product availability and for an estimated time of arrival. \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\" data-mce-href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e | \u003ca href=\"tel:(574)287-9650\" data-mce-href=\"tel:(574)287-9650\"\u003e(574)287-9650\u003c\/a\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-ng-bind=\"part.partData.longDesc\" class=\"partDesc pzv-text-bt30 pzv-text-tc5 ng-binding ng-scope\" data-ng-if=\"part.partData.longDesc\"\u003e \u003c\/p\u003e\n\u003cp data-ng-bind=\"part.partData.longDesc\" class=\"partDesc pzv-text-bt30 pzv-text-tc5 ng-binding ng-scope\" data-ng-if=\"part.partData.longDesc\"\u003eUniversal Joint Greaseable BMW Mazda Staked Replacement Series\u003c\/p\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e","published_at":"2021-07-13T15:35:38-04:00","created_at":"2021-07-13T15:35:38-04:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["43011","53201X","Brand_Spicer","Cap Size_0.947\"","CapSizeBullet_0.947\"","Grease_Greasable","LockUpBullet_1.900\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_1.900\"","U-Joint Type_Inside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Inside Snap Ring","Vehicle_BMW","Vehicle_Diahatsu","Vehicle_Mazda"],"price":3791,"price_min":3791,"price_max":3791,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40500234256535,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-3201X","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Spicer 5-3201X U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":3791,"weight":748,"compare_at_price":null,"inventory_quantity":-7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"023913126612","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Front_5106.png?v=1626204989","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Angle_5105.png?v=1626204989"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Front_5106.png?v=1626204989","options":["Title"],"media":[{"alt":null,"id":23614033002647,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Front_5106.png?v=1626204989"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Front_5106.png?v=1626204989","width":600},{"alt":null,"id":23614032969879,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Angle_5105.png?v=1626204989"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3201X_Angle_5105.png?v=1626204989","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003ch2\u003eSpicer Driveshaft Universal Joint \u003cmeta charset=\"utf-8\"\u003e \u003cb class=\"ng-binding ng-scope\" ng-if=\"part.partTypeValue != 'SUBMODEL'\" data-mce-fragment=\"1\"\u003e5-3201X\u003c\/b\u003e\u003cbr\u003e- Speciality “STAKED-IN” Replacement U-Joint\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eT\u003c\/span\u003ehis part is drop shipped from the manufacturer and will ship at the earliest available time. Average time to ship is 1-3 business days from when you place the order. You can contact Action Machine Inc. to confirm product availability and for an estimated time of arrival. \u003ca href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\" data-mce-href=\"https:\/\/m.me\/126080680780625?ref=messenger_commerce_1163199097047119_https:\/\/actionmachineinc.myshopify.com\/collections\/step-2-slip-yokes?_sc=1\u0026amp;design_theme_id=169352453\u0026amp;frame_token=M_N5SwVtMVwJVnoWROpsibpht2k2_W8cadlvVAJ0kej_vX_Kn1ZeTiXa9q1gt0_QsQQBNTSagPD0jTIUAGNvWcgHdpxZLlBDrXx0QjFkCDdGrNxRamwV7l-GVSbjpuuoiaDEFMvvgL5EMsWwP1LiKA%3D%3D\"\u003eCHAT\u003c\/a\u003e | \u003ca href=\"tel:(574)287-9650\" data-mce-href=\"tel:(574)287-9650\"\u003e(574)287-9650\u003c\/a\u003e \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp data-ng-bind=\"part.partData.longDesc\" class=\"partDesc pzv-text-bt30 pzv-text-tc5 ng-binding ng-scope\" data-ng-if=\"part.partData.longDesc\"\u003e \u003c\/p\u003e\n\u003cp data-ng-bind=\"part.partData.longDesc\" class=\"partDesc pzv-text-bt30 pzv-text-tc5 ng-binding ng-scope\" data-ng-if=\"part.partData.longDesc\"\u003eUniversal Joint Greaseable BMW Mazda Staked Replacement Series\u003c\/p\u003e\n\u003cinput checked name=\"tabs\" type=\"radio\" id=\"tab1\"\u003e \u003clabel for=\"tab1\"\u003eNotes\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab2\"\u003e \u003clabel for=\"tab2\"\u003eSpecs\u003c\/label\u003e \u003cinput name=\"tabs\" type=\"radio\" id=\"tab3\"\u003e \u003clabel for=\"tab3\"\u003eVehicle Fit\u003c\/label\u003e  \u003cinput name=\"tabs\" type=\"radio\" id=\"tab4\"\u003e \u003clabel for=\"tab4\"\u003eInstall\u003c\/label\u003e\n\u003csection id=\"content1\"\u003e\n\u003cp\u003e\u003cspan\u003eThis u-joint replaces the OEM ‘staked in’ u-joint found on select vehicles.  See vehicle fitment section for the list of applicable vehicles.  The u-joint converts from the OEM staked u-joint to an inside C-clip u-joint using the flats on the inside of the yoke ears.  The yoke ears must have milled flats for this u-joint to fit.  \u003c\/span\u003e\u003cspan\u003eDouble check the application before you press or cut out your original equipment u-joints. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content2\"\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"table table-bordered\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eType:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eStaked-In\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eBearing Cap Diameter:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.\u003cmeta charset=\"utf-8\"\u003e947 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003eInside Lockup:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e1.900 Inch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eSnap Ring Style:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInside Snap Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"ng-scope\" data-ng-repeat=\"(key,val) in part.partData.attrs\"\u003e\n\u003ctd class=\"ng-binding\"\u003e\u003cstrong\u003eGrease Type:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGreasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection id=\"content3\"\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\u003cstrong\u003eMake \u0026amp; Model \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\u003cstrong\u003eYear\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eBMW, \u003cem\u003e735i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1987,1988, 1989, 1990, 1991, 1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003e750i\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eBMW\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cem\u003eM5\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1991, 1992, 1993, 1994\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eDiahatsu, \u003cem\u003eRocky (Rear)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1990, 1991, 1992\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003e929\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2000\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1979, 1980, 1981, 1982, 1983, 1984\u003cbr\u003e1986, 1987, 1988, 1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eB2200\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1979, 1980, 1981, 1982, 1983, 1984\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e1987, 1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eB2600\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e1987, \u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003eMazda, \u003cem\u003eMPV (2WD)\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991, 1992, 1993\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 34.2612%;\" data-mce-style=\"width: 34.2612%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003eMazda, \u003c\/span\u003e\u003cem\u003eMX7 Turbo\u003c\/em\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 43.7388%;\" data-mce-style=\"width: 43.7388%;\"\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cspan\u003e1987, \u003c\/span\u003e\u003cspan\u003e1988, 1989, \u003c\/span\u003e\u003cspan\u003e1990, 1991\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection id=\"content4\"\u003e\n\u003ch3\u003e\u003cstrong\u003eDisassembly of the “Non-Rebuildable” U-Joint\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"Disassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/DISASSEMBLY_large.png?v=1562953594\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Use a press or a hammer to force the bearing cap out of the staked ear hole.* \u003cem\u003eNOTE: CONSIDERABLE FORCE MAY BE REQUIRED.\u003c\/em\u003e\u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a vise or pliers to remove the bearing cap which is exposed on the opposing side, a twisting motion may help unseat the cap.\u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e A small grinding wheel or cartridge roll \u0026amp; arbor may then be used to smooth the staked earhole on the driven side “A” in order to make the removal of the opposite bearing cap easier.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Use the same method as above to remove the remaining bearing caps.\u003cbr\u003e\u003cstrong\u003e5.\u003c\/strong\u003e Once the bearing caps are removed discard the used joint and inspect the yoke and flange for damage and clean out the remaining staked tabs\u003c\/p\u003e\n\u003ch3\u003eReassembly of the “Non-Rebuildable” U-Joint\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"Reassembly\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/reassembly_large.png?v=1562954694\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1.\u003c\/strong\u003e Press the new U-joint and bearing caps into position and insert clip (Fig. 4). \u003cbr\u003e\u003cstrong\u003e2.\u003c\/strong\u003e Use a press or hammer to expose the opposite slot then insert the second clip (Fig. 5). \u003cbr\u003e\u003cstrong\u003e3.\u003c\/strong\u003e Use the same method to insert the remaining clips.\u003cbr\u003e\u003cstrong\u003e4.\u003c\/strong\u003e Make certain that the clips are completely seated into the groove of the new bearing caps. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation tips\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- When the snap rings are installed they may leave a large gap at the top of the yoke.\u003cbr\u003e-To assure a good contact fit you need to roll the snap ring around in the groove of the cup to get the most possible surface of the snap ring against the inside of the yoke ears\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Snap Ring Install\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\" data-mce-src=\"\/\/cdn.shopify.com\/s\/files\/1\/2012\/8549\/files\/Snap_Ring_large.png?v=1562955278\"\u003e\u003c\/p\u003e\n\u003cp\u003e1. Install Snap Ring into Bearing Cup Groove\u003cbr\u003e2. Rotate Snap Ring 180 degrees\u003cbr\u003e3. Placement required to get most contact with yoke\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\u003c!--\np:not(:last-child) {\n margin: 0 0 20px;\n}\n\n\nsection {\n display: none;\n padding: 50px 0 0;\n border-top: 1px solid #DE330E;\n}\n\n#tab1 {\n display: none;\n}\n#tab2 {\n display: none;\n}\n#tab3 {\n display: none;\n}\n#tab4 {\n display: none;\n}\n\nlabel {\n display: inline-block;\n margin: 0 0 -1px;\n padding: 15px 25px;\n font-weight: 600;\n text-align: center;\n color: #abc;\n border: 1px solid transparent;\n}\n\nlabel:before {\n \n font-weight: normal;\n margin-right: 10px;\n}\n\nlabel[for*='1']:before { content: '\\f1cb'; }\nlabel[for*='2']:before { content: '\\f17d'; }\nlabel[for*='3']:before { content: '\\f16c'; }\nlabel[for*='4']:before { content: '\\f171'; }\n\nlabel:hover {\n color: #789;\n cursor: pointer;\n}\n\ninput:checked + label {\n color: #DE330E;\n border: 1px solid #abc;\n border-top: 2px solid #DE330E;\n border-bottom: 1px solid #fff;\n}\n\n#tab1:checked ~ #content1,\n#tab2:checked ~ #content2,\n#tab3:checked ~ #content3,\n#tab4:checked ~ #content4 {\n display: block;\n}\n--\u003e\u003c\/style\u003e"}

{"id":915586514996,"title":"Neapco 3-0488 U-Joint \"Staked In\"","handle":"3-0488","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\u003cstrong\u003eDriveshaft Universal Joint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFord F150 Staked in replacement Joint (2004, 2005, 2006 \u0026amp; 2007)\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLock-Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e3.787 Inch (A1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e3.787 Inch (A2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Cap Diameter: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e1.066 Inch (B1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e1.066 Inch (B2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Type: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nRound - Outside Snap Ring\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Lube Fitting Location: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nNo Lube Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Manufacturer\/Series: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nVisteon Special \/ Staked Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Greasable: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eNon Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e","published_at":"2017-05-30T08:16:40-04:00","created_at":"2018-05-10T08:39:38-04:00","vendor":"Neapco","type":"Universal Joint Kit","tags":["30488","Brand_Neapco","Cap Size_1.066\"","CapSizeBullet_1.066\"","Grease_Non-Greasable","LockUpBullet_3.787\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_3.79\"","U-Joint Type_Outside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Outside Snap Ring","Vehicle_Ford"],"price":11914,"price_min":11914,"price_max":11914,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":8225002160180,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"3-0488","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Neapco 3-0488 U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":11914,"weight":862,"compare_at_price":null,"inventory_quantity":-3,"inventory_management":null,"inventory_policy":"deny","barcode":"083869304885","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.jpg?v=1525956101","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.box.jpg?v=1562784385","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.joint.jpg?v=1562784388"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.jpg?v=1525956101","options":["Title"],"media":[{"alt":null,"id":2598307528839,"position":1,"preview_image":{"aspect_ratio":1.0,"height":400,"width":400,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.jpg?v=1525956101"},"aspect_ratio":1.0,"height":400,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.jpg?v=1525956101","width":400},{"alt":null,"id":3021925449863,"position":2,"preview_image":{"aspect_ratio":1.184,"height":3357,"width":3974,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.box.jpg?v=1562784385"},"aspect_ratio":1.184,"height":3357,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.box.jpg?v=1562784385","width":3974},{"alt":null,"id":3021925482631,"position":3,"preview_image":{"aspect_ratio":0.815,"height":1500,"width":1223,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.joint.jpg?v=1562784388"},"aspect_ratio":0.815,"height":1500,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/3-0488.joint.jpg?v=1562784388","width":1223}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\u003cstrong\u003eDriveshaft Universal Joint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFord F150 Staked in replacement Joint (2004, 2005, 2006 \u0026amp; 2007)\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLock-Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e3.787 Inch (A1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e3.787 Inch (A2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Cap Diameter: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e1.066 Inch (B1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e1.066 Inch (B2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Type: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nRound - Outside Snap Ring\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Lube Fitting Location: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nNo Lube Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Manufacturer\/Series: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nVisteon Special \/ Staked Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Greasable: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eNon Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024-001-004\u003c\/em\u003e\u003c\/p\u003e"}

{"id":7010824847511,"title":"Spicer 5-3203X U-Joint \"Staked In\"","handle":"5-3203x","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\u003cstrong\u003eDriveshaft Universal Joint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFord F150 Staked in replacement Joint (2004, 2005, 2006 \u0026amp; 2007)\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLock-Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e3.787 Inch (A1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e3.787 Inch (A2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Cap Diameter: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e1.066 Inch (B1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e1.066 Inch (B2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Type: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nRound - Outside Snap Ring\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Lube Fitting Location: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nNo Lube Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Manufacturer\/Series: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nVisteon Special \/ Staked Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Greasable: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eNon Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e","published_at":"2021-07-14T13:50:14-04:00","created_at":"2021-07-14T13:50:14-04:00","vendor":"Spicer\/Dana","type":"Universal Joint Kit","tags":["3-0488","30488","Brand_Spicer","Cap Size_1.066\"","CapSizeBullet_1.066\"","Grease_Non-Greasable","LockUpBullet_3.787\"","Part_U-Joint","Series_Staked-In Replacement","SeriesBullet_Staked-In Replacement","Snap Ring to Snap Ring_3.79\"","U-Joint Type_Outside Snap Ring","U-Joint Type_Staked-In","UJointTypeBullet_Outside Snap Ring","Vehicle_Ford"],"price":12638,"price_min":12638,"price_max":12638,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40509500883095,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5-3203X","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Spicer 5-3203X U-Joint \"Staked In\"","public_title":null,"options":["Default Title"],"price":12638,"weight":862,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"023913126520","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Top_4779.png?v=1626285088","\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Front_4778.png?v=1626285088"],"featured_image":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Top_4779.png?v=1626285088","options":["Title"],"media":[{"alt":null,"id":23632912056471,"position":1,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Top_4779.png?v=1626285088"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Top_4779.png?v=1626285088","width":600},{"alt":null,"id":23632912023703,"position":2,"preview_image":{"aspect_ratio":1.0,"height":600,"width":600,"src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Front_4778.png?v=1626285088"},"aspect_ratio":1.0,"height":600,"media_type":"image","src":"\/\/www.actionmachineinc.com\/cdn\/shop\/products\/5-3203X_Front_4778.png?v=1626285088","width":600}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch1\u003e\u003cstrong\u003eDriveshaft Universal Joint\u003cbr\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003ch1\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFord F150 Staked in replacement Joint (2004, 2005, 2006 \u0026amp; 2007)\u003c\/span\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLock-Up:\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e3.787 Inch (A1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e3.787 Inch (A2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Cap Diameter: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\n\u003cspan\u003e\u003cspan\u003e1.066 Inch (B1) \u0026amp; \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e1.066 Inch (B2)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Bearing Type: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nRound - Outside Snap Ring\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Lube Fitting Location: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nNo Lube Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Manufacturer\/Series: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/div\u003e\nVisteon Special \/ Staked Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\u003cstrong\u003e Greasable: \u003c\/strong\u003e\n\u003c\/td\u003e\n\u003ctd\u003eNon Greasable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVMRS: 024002046\u003c\/em\u003e\u003c\/p\u003e"}